Laurence Marchini, Editor, writes:
We see from your search that you're looking for information on the term "Daughterboards",
and we have a large number of manufacturers' news releases and technical articles here on Electronicstalk which will be of interest.
Let me be your guide.
Start with
the news release Connectors come in multiple configurations from
Sullins Electronics, which we summarised at the time by saying "The PCB mount series' cantilever contacts offer a reliable connection in a wide array of high-reliability, or high-cycle mother-daughterboard applications".
A couple of weeks before,
we featured the news release ASIC prototyping board boasts biggest FPGA from
Synplicity: "System provides a cost-effective, high-performance prototyping solution that reduces development time for today's challenging SoC designs".
In June 2007, we covered the news from Future Electronics
concerning its Crossbow
- take a look at Board eases transition between 8 and 32bit MCUs
which says: "Development board allows designers experiment with the use of various 8 and 32bit Freescale Semiconductor microcontrollers in system prototypes".
Take a look also at the news release from Hardi Electronics, ASIC prototyping board boasts biggest FPGA,
as well as Daughtercard adds Flash disk flexibility from Radstone Embedded Computing,
and FPGA development board is even more configurable from Altium.
See also:
Prototyping is cost-effective for smaller ASICs
(March 2006)
Two new series of third-generation motherboards bring the performance of the Hardi ASIC Prototyping System (HAPS) for multi-million-gate ASICs to smaller designs
System supports embedded PowerPC processors
(January 2006)
Altium has added support for the AMCC 405xx family of embedded PowerPC processors in the latest version of its unified electronic product development system
Motherboards master FPGA prototyping
(October 2005)
Hardi Electronics has used the ARM Developer's Conference to release a new series of motherboards it claims feature unmatched performance and capacity
Daughterboards speeds DSP applications development
(September 2005)
Kane Computing has recently signed an agreement to become the main international distributor for Bitec's DSP daughterboards
Design suite extends to low-cost Lattice FPGAs
(September 2005)
Altium is supporting Lattice Semiconductor's LatticeEC and LatticeECP FPGA devices as part of its recently released Service Pack 4 (SP4) for Altium Designer
Core module adds daughters for fast customisation
(July 2005)
The EmCORE-i761 embedded board is based on the Intel Pentium M processor, and offers a very short time-to-market solution for OEM customers
Board aids digital video recorder development
(June 2005)
The Dorado Quattro from IDS is the latest high-speed multiple-camera video compression board designed for DVR development
Workshops show off 32bit design capabilities
(February 2005)
This week at Embedded World 2005 Altium will explain its approach to 32-bit system development on FPGAs through a series of interactive workshops
Processors embed audio, video and comms
(February 2005)
Analog Devices has released four new network-enabled Blackfin processors designed for embedded audio, video and communications applications
Emulation system supports more PIC devices
(January 2005)
RF Solutions has significantly increased the number of personality daughterboards it offers for use with its ICEPIC emulation system
Programme promotes FPGA expertise
(January 2005)
Sundance has joined the Xilinx Xperts Programme, helping OEMs that need to implement complex and reconfigurable embedded system designs
Design software takes in latest FPGA developments
(December 2004)
The Nexar system design software suite has been updated to support v4.2 of Altera's Quartus II development software
Low-RISC approach to 32bit system development
(November 2004)
Altium's Service Pack 2 for Nexar will include a new 32bit FPGA-based RISC processor that will greatly simplify the development of 32bit systems for FPGA implementation
Kits show off live approach to electronics design
(October 2004)
New LiveDesign evaluation kits include a versatile, low-cost evaluation board with the choice of either an Altera Cyclone or Xilinx Spartan-3 FPGA device
Software illustrates merits of proper grounding
(September 2004)
Recent research has indicated that electromagnetic emissions from interface cards can be reduced by as much as 20dB through simple changes in grounding arrangements
Switches and bridges ready for PCI Express growth
(July 2004)
The new PLX PEX line of PCI Express bridges and switches is billed as the industry's most complete and flexible line of interconnect chips based on PCI Express technology
Software supports Spartan-3 designs
(June 2004)
Altium is adding support for Xilinx Spartan-3 platform FPGAs to its Nexar system design software
Low-risk route to added Bluetooth functionality
(June 2004)
A new range of Bluetooth development and evaluation products enable fast and cost effective implementation of wireless technology into both current/legacy products and new product development
Daughterboards add latest FPGA support
(May 2004)
Two new daughterboards will enable engineers using the Nexar development system to interactively develop entire processor-based digital systems on Altera Stratix and Xilinx Virtex-II FPGAs
PIC emulator is speedy and versatile
(March 2004)
ICEPIC3 is a universal in-circuit emulator for the popular PIC microcontroller series
Virtual prototyping now verifies complete systems
(March 2004)
Hot-Stage 4.2 is the latest upgrade to Zuken's high-speed virtual prototyping tool for PCB design
More scope for ASIC prototyping system
(February 2004)
Three new daughterboards add capabilities such as Ethernet, USB and analogue video to the HAPS modular ASIC prototyping system
Embedded FPGA design system is vendor independent
(November 2003)
Nexar is the industry's first product to provide a comprehensive, vendor-independent solution for system-level design on an FPGA platform
Real-time platform for real ASIC prototypes
(March 2003)
Available now, Version 2.1 of the Hardi ASIC prototyping system (HAPS) provides real-time speed, real-time debugging and full ASIC functionality for ASIC prototyping designers
Connector simplifies daughterboard replacement
(January 2003)
A recent application for the ODU Mini-Fix card-to-cable connector system simplifies the safe replacement of daughterboards in an optical multiplexing project
DC ammeters take shunts onboard
(December 2002)
Datel's new DCA-20PC series LED-display digital DC ammeters are 100% self contained
CANbus modules aim at industrial embedding
(December 2001)
Now available from Computer Solutions, the Peak System range of CANbus modules and interfaces offer facilities for integrating local CAN communications into embedded systems
Thick-film polyester circuits are more flexible
(December 2001)
In2tec is supporting the trend towards replacing hard-substrate PCBs with flexible thick-film polyester circuits, delivering a number of benefits
Tolerance is a blessing for MCM connector
(May 2001)
Suited to high-density requirements, RJ connectors from Hypertac find numerous applications in the interconnection of dual-cavity MCMs, PCBs and daughterboards