Laurence Marchini, Editor, writes:
We see from your search that you're looking for information on the term "Electromagnetic compatibility",
and we have a large number of manufacturers' news releases and technical articles here on Electronicstalk which will be of interest.
Let me be your guide.
Start with
the news release Electromagnetic testing agreement signed from
UL International (UK), which we summarised at the time by saying "UL aims to streamline the product compliance process for its customers by combining RFI's EMC testing facilities with UL's product safety testing and certification services".
A few weeks before,
we featured the news release Rack power system includes UPS option from
Schroff UK: "System provides a total of 21 individually fused 56V DC outputs and delivers a maximum output power of 1400W".
In October 2007, we covered the news from Tecan
concerning its The World of EMI/RFI Enclosures
- take a look at Electronics encyclopedia provides design guidance
which says: "The World of EMI/RFI Enclosures covers all aspects of the design, prototyping and manufacture of off the shelf and custom shielding solutions".
Take a look also at the news release from TUV SUD America, EU EMC testing is available in the USA,
as well as Power source upgrades for harmonic compliance from TTi (Thurlby Thandar Instruments),
and Academic collaboration targets automotive EMC from STMicroelectronics.
See also:
RF and microwave event comes to the UK
(May 2007)
The inaugural UK EEEfCOM will take place at the RAF Museum in London on 27th and 28th June 2007
Compounds provide EMI shielding
(April 2007)
By using a nonbrominated, nonchlorinated flame retardant system, GE Plastics' LNP Faradex compound can help manufacturers curtail the use of hazardous substances in electronics
NMI CEO to chair national alliance
(April 2007)
Derek Boyd has been elected Chairman of the UK Electronics Alliance
University marks a quarter-century of EMC training
(April 2007)
York is celebrating 25 years by offering NARTE certification as an option to its portfolio of courses
Flormerics' software reduces time to market
(April 2007)
An independent survey found that users of thermal-analysis software have over 40% fewer respins on average per printed circuit board (PCB) design than non-users
Corporate brochure covers enabling technologies
(March 2007)
The Precision Solutions business centre of MBDA UK has launched a new series of full colour literature
Configurable chip in single or dual-core variants
(March 2007)
Single and dual-core variants of a configurable system-on-chip array are intended for embedded applications in printers, faxes, point-of-sale equipment and other systems
Gordge takes charge of testing facilities
(December 2006)
Peter Gordge has been appointed as Business Manager for a range of services offered by the newly formed Precision Solutions business centre of MBDA UK
Mobile comms testing moves to new building
(November 2006)
Cetecom has moved its administration and mobile communications testing laboratory to a brand-new building
Flexible supplies squeeze in more power
(November 2006)
The latest model in the fleXPower family of configurable power supplies, the fleXPower X10 brings an 11% increase in power using the same size chassis as earlier 900W models
Proximity sensors provide consistent detection
(November 2006)
Leveraging ADI's industry-leading capacitance technology, the AD7150 delivers a complete signal processing solution for proximity sensors
Acquisition expands environmental and EMC testing
(November 2006)
TUV SUD America has acquired EST Testing Solutions, an environmental and EMC testing organisation specialising in providing services to the automotive and furniture industries
Upgrade for EMI analysis
(October 2006)
The latest version of Icewave incorporates enhanced model building capabilities and radiation computation for EMC/EMI analysis of electronic systems
Transformers are fit for medical manufacturer
(October 2006)
Moor Instruments needed to find a readily available off-the-shelf transformer that met global medical standards
EMC simulation cuts the cost of board respins
(October 2006)
Suppliers of IT infrastructure equipment address EMC during the early design phase using Flo/EMC electromagnetic simulation software
Infra-red sensor takes signal conditioning onboard
(September 2006)
IR sensor helps OEMs to integrate noncontact temperature measurement in car air conditioning, room heaters, home appliances, handhelds and medical equipment
Webcast helps designers with Class-D amplifiers
(August 2006)
Live analogue eLab webcast for designers covers 'Class-D audio power amplifiers: operation, efficiency and EMC'
Survey illustrates design conflicts
(August 2006)
Survey highlights the conflict that often occurs between meeting thermal, electromagnetic compatibility and signal integrity design requirements in the development of new PCB designs
Harmonic current standard is updated
(August 2006)
Available now from the British Standards Institution (BSI) is a new edition of BS EN61000-3-2:2006 Electromagnetic compatibility (EMC) - Limits for harmonic current emissions
High-speed design and signal integrity workshop
(June 2006)
Ansoft UK will hold its High-Speed Design Forum on Tuesday 3 October, at its office in Basingstoke, Hampshire
Simulator copes with ICs embedded in PCBs
(May 2006)
Imbera used Flotherm thermal simulation software to optimise the thermal management of a series of integrated module boards that use a novel production process
Manufacturing help brings EMC sniffer to market
(May 2006)
A revolutionary new product from a small Buxton-based company is now helping electronic designers save valuable costs in testing their designs
Experts line up for high-speed panel session
(May 2006)
The Continuing Professional Development Centre hosts this summer's High-Speed Digital Engineering Week from 27th to 30th June 2006 in Oxford
Module turns COTS convertors to military specs
(April 2006)
A filtering and active surge suppression module enables fast design of military specification power systems using economical industrial DC/DC convertors
Tiny FM transmitter brings multimedia together
(March 2006)
Alps has completed development of its TSM 1-6 series of FM transmitter modules for use with mobile phones and other small portable devices
Software predicts anechoic chamber performance
(March 2006)
MicroStripes software played a key role in the design of an anechoic chamber by simulating the performance of the chamber within +/-1dB accuracy
Rack family houses VME and CompactPCI
(March 2006)
Systemkit Type 12K is an all-new state-of-the-art 19in rack family from Elma
Integrated environment lifts design constraints
(January 2006)
Otis Elevator Company is getting new products to market faster with a design methodology that integrates thermal and EMC analysis to meet increasingly tough requirements for lift controls
8bit MCUs extend to high-end industrial tasks
(January 2006)
A new family of microcontrollers brings the advantages of the popular HCS08-core-based architecture to high-end high-pin-count 8bit applications
Physical tests validate EMC simulation
(January 2006)
Flo/EMC electromagnetic compatibility software has been used to predict the performance of enclosure shielding at gigahertz frequencies, and the results matched those from physical testing
Training classes help make the most of simulation
(January 2006)
An extensive programme of training classes will help users take full advantage of thermal, electromagnetic compatibility, and antenna and microwave simulation software
System makes it easy to take EMF measurements
(December 2005)
Willtek Communications has introduced a handheld product for electromagnetic field (EMF) measurements
Handheld analyser turns to EMF measurement
(November 2005)
The 9102 handheld spectrum analyser with the 9131 EMF measurement option allows users to test actual radiation against defined limits
Flomerics and SimLab create software interface
(November 2005)
A software interface has been created that links board-level and system-level electromagnetic compatibility (EMC) analysis