Laurence Marchini, Editor, writes:
We see from your search that you're looking for information on the term "EMI filtering",
and we have a large number of manufacturers' news releases and technical articles here on Electronicstalk which will be of interest.
Let me be your guide.
Start with
the news release Compact protectors cover ESD and EMI from
STMicroelectronics, which we summarised at the time by saying "Both devices meet IEC61000-4-2 level 4 for ESD protection and feature low line-to-earth capacitance of 30pF to preserve high-speed signal integrity".
A couple of weeks before,
we featured the news release Power supplies are approved for medical uses from
Young Electronics Group: "Medically approved 1000W power supplies are initially available with 5, 12 or 24V outputs".
In January 2008, we covered the news from Syfer Technology
concerning its Syfer discoidal multilayer ceramic capacitors
- take a look at Ceramic capacitors suit EMI filtering
which says: "Syfer's discoidal multilayer ceramic capacitors can be installed directly into filters, onto bulkheads, hybrid circuits or onto printed circuit boards".
Take a look also at the news release from Emerson Network Power - Embedded Power, Adapters are made for charging portable CE devices,
as well as Range cuts the cost of inductor-capacitor filters from California Micro Devices,
and Multifunction IC cleans up card interfaces from STMicroelectronics.
See also:
Video devices target critical subsystems
(June 2007)
Display, audio and power management products enable energy-efficient video in handheld devices
Single-output switchers keep their cool
(June 2007)
Educed cooling requirements facilitate greater overall-system layout flexibility as the SBLP65 does not have to be located directly adjacent to a system fan
Chipset creates military-spec power systems
(June 2007)
MIL-COTS chipset provides the full functionality of a DC/DC convertor with high efficiency and higher power density, fast transient response, low noise and flexible thermal management
Slimline filters protect against EMI and ESD
(March 2007)
Breakthrough EMI filters provide the industry's highest level of ESD protection in ultrathin leadless packages
Multilayer capacitors enhance EMI filtering
(March 2007)
Multilayer capacitors in 1808 and 1812 case sizes are certified to IEC384-14/IEC60950/EN132400 for power and telecomms applications
COTS supplies are made for military duties
(November 2006)
New class of user-defined, modular power solutions cover military COTS applications such as radar, military ground vehicle, communications equipment and aerospace
Switchers meet global medical demands
(September 2006)
Modules are aimed at the needs of designers of electronic equipment in medical applications requiring a safe, compact and adaptable power solution
Military-spec DC/DCs come off the shelf
(September 2006)
A series of 4 to 35W DC/DC convertors is designed as a standard product family exclusively for defence and avionics applications
New series of low power switchers
(July 2006)
UR Group has introduced the LP25 and LP40 series of low power switchers from its partner Astec Power, providing a new terminal block option
Supplies deliver up to 1000W for medical systems
(July 2006)
High-power single-output power supplies are designed specifically for medical system applications
Low-profile modular supplies come together quickly
(April 2006)
The 1U-high four- or six-slot Multistax range has been specifically designed to allow easy and rapid configuration
Capacitor arrays ease EMI filtering
(April 2006)
Oxley has released a new planar capacitor arrays product information sheet unveiling the latest information on part of its high quality EMI filter product range
Programme promises faster access to planar arrays
(March 2006)
A lean manufacturing programme aims to reduce lead times of planar arrays by a third
Chokes cut noise from CANbus systems
(December 2005)
Steward offers current compensated surface mount chokes for controller area networks (CANbus) in automotive and industrial controls applications
Power modules have ultrafast transient response
(November 2005)
A new family of nonisolated, plug-in power modules use a technology that provides ultrafast transient response rates and avoids the need for output capacitors
Switchers offer choice of formats
(November 2005)
Two new series of 60W switch mode power supplies will suit a wide variety of commercial and medical applications
Making more space for noise suppression
(November 2005)
Murata has announced the SMD BNX022, the latest addition to its comprehensive EMIFIL range of noise suppression products
Switchers range from 3 to 60W
(September 2005)
A new line of AC/DC switching power supplies ranges from 3 to 60W, with standard universal input voltages and single output voltages from 2.8 to 24V DC
Military UPS takes the toughest treatment
(September 2005)
A rugged new 1.5kVA uninterruptible power supply is designed for naval or ground mobile military applications where high levels of shock or vibration are likely to damage an industrial UPS
Triple-output supplies provide flexible power
(September 2005)
Two new triple-output AC/DC power supplies are ideal for 1U 'pizza-box' applications and can provide enhanced flexibility in the physical layout and power distribution architecture of the host system
Power-over-Ethernet supply has universal AC inputs
(July 2005)
The Astec Power DS657 is an AC/DC source for power-over-Ethernet (PoE) applications
Sensor amplifier has automotive aspirations
(May 2005)
A new digitally programmable sensor amplifier features internal EMI filtering and a wide temperature range making it well suited for a variety of automotive and industrial applications
Compact switchers have global applications
(May 2005)
New from Astec Power, the LPS50 Series of AC/DC switching power supplies deliver 55W of total power at 5V DC or 60W at 12, 15, 24 or 48V DC
Supplies can be rack mounted or free-standing
(May 2005)
The GPHP1000 series are 1000W N+1 power supplies designed for use in a Condor rack or as a system component using either a DIN connector or terminal block for connection
SMD common mode chokes work up to 10A continuous
(April 2005)
Monolithic surface mount common mode chokes are designed for power and data line EMI filtering where high current, small size or high frequency performance is required
External switchers have global appeal
(March 2005)
The DPS50 Series of external switching power supplies from Astec Power delivers 30W of total power at 5V DC or 60W at 12, 15, 24 or 48V DC
Power input modules meet AdvancedTCA specs
(March 2005)
The PIM200 series are the industry's first power input modules designed to comply with the Advanced Telecom Computing Architecture (AdvancedTCA) specifications
1000W supplies aim for medical applications
(March 2005)
The GPMP1000 series of 1000W single output medical power supplies use either a DIN connector or terminal block for connection and offer a range of standard features including overload protection
Ferrite chokes cut space for high-current designs
(March 2005)
Steward's new CM1812x330R monolithic surface mount common mode chokes are designed for power and data line EMI filtering where high current, small size or high frequency performance is required
Budget switcher boasts superior thermal management
(February 2005)
Available now from Power-One iss the BLP55-Series of 55W single-output AC/DC power supplies
Schottky rectifiers move up to 250V
(November 2004)
A new range of 200-250V Schottky diodes is claimed to outperform traditional ultrafast rectifiers - eliminating noise at all temperatures
Ferrite toroids aid SMPS suppression
(November 2004)
Steward has extended its range of ferrite products to include T-Series toroids in diameters ranging from 6 to 36mm
Modular supplies boast top power density
(October 2004)
A new generation of modular AC/DC power supplies is believed to be the highest-efficiency and highest-power-density configurable products in the world
Toroids aim to optimise Ethernet performance
(October 2004)
Steward is using Electronica 2004 to showcase its latest ferrite products for inductive and EMI filtering applications