‘Ethernet Interface’
An Electronicstalk guide
Start with the news release
Power supplies can be provided in 2U rack mount from
Safety Power, which we summarised at the time by saying "Safety Power has launched a range of high-quality 3,000W analogue power supplies that can be supplied in 2U rack mount or as an installation unit for mounting-board assembly applications. ".
Several months prior to that,
we featured the news release MCC offers bus-powered USB-to-I2C-bus adapter from
Micro Computer Control: "The I2CStick from Micro Computer Control (MCC) is a bus-powered USB-to-I2C-bus adapter for on-the-go mobile developers, test engineers and field-support personnel.".
In March 2010, we covered the news from Laird Technologies
- take a look at Laird enhances TEM simulation software tool
which says: "Laird Technologies has launched its enhanced online thermoelectric module (TEM) simulation software tool, Aztec. ".
Take a look also at the news release from Mydata Automation, Commsaudit selects Mydata pick-and-place machine,
as well as Tyco Electronics launches miniature trunk cable from Tyco Electronics,
and Radicom Research launches medical-certified modems from Radicom Research.
Latest stories...
Campbell Collins demonstrates Ericsson converters (March 2010)
Campbell Collins is able to demonstrate Ericsson Power Modules' range of digitally controlled DC/DC converters and point-of-load voltage regulators using the 3E evaluation kit and software.
Modbus PSU for test and instrumentation systems (March 2010)
VxI Power has launched the OPP-200 programmable Modbus power supply (PSU), designed for use in test and instrumentation systems where accurate control and monitoring are essential.
BVM launches fanless PC for embedded applications (March 2010)
BVM has announced the availability of the ECK-161B, a Core 2 Duo fanless PC.
Premo inductors target telecom power supplies (March 2010)
Premo has launched its PBP19 series of inductors designed for DC/DC converters and telecom power supplies up to 500W.
6Wind software supports Intel Xeon processors (March 2010)
6Wind has announced support for the multi-core, embedded Intel Xeon processor EC5549 and Intel Xeon processor E5645.
E-con COM features 2D graphics controller (March 2010)
E-con systems has launched the eSOM300, a computer-on-module (COM) based on Marvell's PXA300 processor.
Placement machines perform error-free assignment (March 2010)
SMD placement machines from Essemtec can identify the PCB using a barcode label.
AMP Netconnect supports Gigabit Ethernet study (March 2010)
Tyco Electronics' AMP Netconnect business is supporting an independent study of UTP (unshielded twisted pair) and STP (shielded twisted pair) systems for 10 Gigabit Ethernet (10GBASE-T).
Further reading
-
Microchip launches Ethernet interface controller
Microchip has introduced the ENC624J600: a low-cost stand-alone IEEE 802.3-compliant 100Mbps Ethernet interface controller.
-
HC.26 connectors provide fast Ethernet interface
Tyco Electronics has launched the HC.26 hybrid connector series, which provides a fast Ethernet interface for real-time applications with eight additional power contacts.