Laurence Marchini, Editor, writes:
We see from your search that you're looking for information on the term "IEEE1101",
and we have a large number of manufacturers' news releases and technical articles here on Electronicstalk which will be of interest.
Let me be your guide.
Start with
the news release VME64 board handles harsh operating environments from
Concurrent Technologies, which we summarised at the time by saying "Well suited to conduction-cooled applications within the transportation, industrial control, telemetry, defence, security and aerospace markets".
A few weeks before,
we featured the news release Computers meet military needs from
Aitech Defense Systems: "Aitech Defense Systems' C108 SBC reduces heat generation for increased reliability, while its pin compatibility reduces upgrade, operating and maintenance and logistics expenses".
In September 2007, we covered the news from Schroff UK
concerning its 12-slot VME64x system
- take a look at Enclosure handles tough applications
which says: "Schroff 's 12-slot VME64x meets the needs of tough military and transportation applications".
Take a look also at the news release from Schroff UK, Desktop cases are equipped for PXI instrumentation,
as well as Mezzanine I/O card is qualified for space duties from Aitech Defense Systems,
and Rugged VMEbus board provides many I/O options from Aitech Defense Systems.
See also:
Tabletop case is home to PXI instrumentation
(January 2006)
Schroff now offers a complete PXI system as a portable tabletop case
Rugged VME board boasts big bus bandwidth
(October 2005)
The C6100 is a high-performance ruggedised single board computer that uses Motorola's new Tundra Tsi148 VMEbus interface chip
Chassis come with VME64x 12-layer backplanes
(July 2005)
The 19in rack mounting slimline Zephyr chassis family is designed for housing a production system or for use in a software/hardware development environment
VMEbus SBC meets extreme military demands
(July 2005)
A new rugged single board computer is designed for demanding military applications that require high performance VMEbus embedded computing in extreme environments
Chassis provides 80W per slot cooling capability
(November 2004)
The Ventus is a new entry-level 12U, 21-slot IEEE1101.10-compliant chassis from APW Electronic Solutions
Rugged connectors handle critical signals
(August 2004)
VME64x is a ruggedised interconnect solution designed for use in critical military, aerospace and telecommunications applications
Enclosures twist for 19in accommodation
(June 2004)
Schroff has developed a series of small enclosures from its RatiopacPro and RatiopacPro-air families for accommodating Euroboards, 19in plug-in units and nonstandard assemblies
Enclosure is cost-effective base for cPCI systems
(May 2004)
The MIC-3041L is billed as the most cost effective 4U-high enclosure for 6U CompactPCI boards
Guide rails cut down on vibration
(April 2004)
A new range of PCB guide rails features a spring in the side wall to ensure the component side is held in the datum position, while reducing the effects of vibration
PXI backplane designs are 'ready to wear'
(August 2003)
An extensive library of modular 3 and 6U standard PXI backplane designs enables customers to specify their required combination of slot widths and power options
Spring finger EMI gaskets shield cPCI enclosures
(May 2003)
A new range of metal spring finger gaskets is ideal for EMI shielding of faceplate interfaces on high frequency CompactPCI industrial computing and communications systems
CompactPCI enclosures minimise downtime
(May 2003)
A new range of CompactPCI enclosures offer high quality and versatility and meet high-availability requirements where redundant operation, quick accessibility and high reliability are essential
cPCI chassis crams a lot into 2U
(October 2002)
Elma has extended its CompactPCI chassis family with a complete, off-the-shelf subsystem including a four-slot PICMG 2.0 R3.0 backplane
Airborne rack accommodates 6U VME64x boards
(September 2002)
The 3/4ATR-WA-M28 airborne rack is an off-the-shelf enclosure ideal for airborne, ship and ground mobile systems, as well as other harsh environment applications
Versatile enclosure has built-in EMI shielding
(April 2002)
Schroff has a new equipment case series: Ratiopac Pro is designed to give a high degree of technical sophistication at an economical price
Modular CompactPCI enclosure takes up to eight
(July 2001)
BVM has released the cPC1000, a modular CompactPCI enclosure, available in many different user-defined configurations
Shielding as standard for instrument cases
(April 2001)
New from Schroff, the ratiopack PRO series of equipment cases is particularly suited to measurement, instrumentation and control applications
CompactPCI platform for embedded development
(February 2001)
The cPC1000DK CompactPCI high performance development platform from BVM is intended for use by system integrators and developers to develop both disc based and embedded applications
Getting the best out of the VME backplane
(September 2000)
We have now reached a point where today's 2mm Hard Metric connectors can provide a future-proof standard, according to Alan Simpson of Selectronix
16-slot CompactPCI backplane to CT/H110
(August 2000)
APW Electronics has announced its latest 16 slot CompactPCI backplane, intended for where packaging densities have to be maximised or where the 8 slot limit imposed by the driver is unacceptable