Laurence Marchini, Editor, writes:
We see from your search that you're looking for information on the term "M12",
and we have a large number of manufacturers' news releases and technical articles here on Electronicstalk which will be of interest.
Let me be your guide.
Start with
the news release Industrial connectors gain EMI shields from
Binder-USA, which we summarised at the time by saying "Iris spring shielding technology is an effective and simple way to protect equipment from electromagnetic interference".
A couple of weeks before,
we featured the news release Ethernet and power combine in one connector from
Harting: "Connector has been developed in response to the increasing use of industrial Ethernet communications in machine installations".
In December 2007, we covered the news from Binder-USA
concerning its 713, 715 and 825 series
- take a look at Easier installation for shielded M12s
which says: "Right-angled connectors with the cage clamp design ensure persistent pressure of each conductor onto its respective contact".
Take a look also at the news release from ITT Electronic Components, Power connectors set for wide exposure,
as well as M12 connectors don stainless steel from Binder-USA,
and Shielded connectors are quicker to install from Binder-USA.
See also:
News on the M8/M12 connector system from Tyco Electronics UK
(June 2007)
M8/M12 connector system finds increasing applications outside the traditional process and factory automation sector
News on the Harax M12-L 5-pole connector from Harting
(April 2007)
A 5-pole M12 connector uses the Harax easy-assembly IDC technique
M12 cordsets gain novel overmould
(January 2007)
Binder-USA has developed new overmould design for all moulded M12 cordsets
Catalogue simplifies searches for connectors
(November 2006)
Binder-USA has published a new full-line product catalogue
Circular connectors survive higher temperatures
(November 2006)
The Binder Series 763 range of M12 circular connectors has been extended to include versions that have an operating temperature of up to 120C
Fibre-optic transceivers adopt M12 form factor
(November 2006)
The Harting microFX range consists of active transceivers with diagnostic function for optical data transmission at speeds of up to 125Mbit/s
Solder-cup contacts ease socket installation
(October 2006)
Binder-USA has released M12 male and female receptacles with solder-cup contacts
Connectors link with sensors and actuators
(October 2006)
Now available in the UK from Aerco is a range of connectors from Binder designed for sensors and actuators used in the industrial machinery and automation industries
Sockets save space on the panel
(October 2006)
Reduced footprint M12 male sockets allow fastening from the back side of a panel and reduce the required surface area for mounting
Adapters enable easier mating
(September 2006)
Binder-USA's 765/768 series M8 to M12 adapters now incorporate turnable metal threaded rings at both ends of the connector
News on the M12 feedthrough connectors from Binder-USA
(May 2006)
M12 threaded connector range adds feedthrough connector design that ensures secure, sealed connections on both sides of a panel
Connectors' coil spring increases EMI protection
(May 2006)
A new shield termination technique employs a coiled shielding spring that firmly connects a cable's braided shield to a connector's metal housing
M12 connectors handle larger wires
(April 2006)
Three-, four- and five-pole M12 connectors with screw termination can now be connected with large diameter wires with cross sections of up to 0.75mm2
Cage clamp termination speeds connection
(April 2006)
A new cage clamp termination design dramatically simplifies installation and reduces connection time for field attachable connectors
Coded connectors secure industrial Ethernet
(March 2006)
The series 825 D-coded connector system is designed for industrial Ethernet applications
Switches and hubs show up at drives event
(March 2006)
At the 2006 Drives and Controls Exhibition, the Harting Technology Group will showcase its new Industrial Communications and Power Networks Division
New division to focus on industrial environment
(February 2006)
The Harting Technology Group has established a new division to focus on industrial automation and process control environments
Catalogue hits the highlights
(January 2006)
A new handy size compact catalogue is full of the latest innovations, including wireless Bluetooth, Speedcon M12 connectors and Ethernet switches
Cordsets mate M12 systems with Ethernet
(January 2006)
A new range of shielded overmoulded cordsets is designed for interfacing M12 system components within industrial Ethernet systems
M12 connectors turn to quick mating
(August 2005)
With the Speedcon quick locking from Phoenix Contact, it only takes half a turn to make electrical connections with an M12 plug connector system
News on the Panel-mount M12 industrial connectors from Harting
(June 2005)
Now available from Harting is a range of panel-mount M12 industrial connectors for panel feedthrough applications
News on the Harting M12 panel feedthroughs from Phoenix Electronics Distribution
(June 2005)
Phoenix Electronics Distribution now has available the new range of Harting M12 industrial connectors for panel feedthrough applications
News on the M12 circular connectors from Electroustic
(April 2005)
Electroustic has a new generation of M12 circular connectors available in straight and angled versions with standard PUR/PVC cable gland length from 0.3 up to 30m
M12 connectors suit industrial Ethernet
(March 2005)
A new range of shielded M12 connectors for industrial Ethernet applications feature robust metal construction for use in the harsh industrial environment, with protection to IP65 or IP67
Power connectors focus on safety and reliability
(March 2005)
The Powerlock connector series for field-installable power distribution systems is available from ITT Industries, Cannon
News on the Types DIN43650 and M8/M12 from In2Connect
(March 2005)
In2Connect Electronic Components has added high-quality, high-reliability and highly competitive industrial connector types DIN43650 and M8/M12 to its range
M12 connectors come with optional shielding
(October 2004)
The popular 763 range of Binder M12 connectors is now available in the UK from Aerco
Industrial Ethernet employs novel sealed connector
(September 2004)
The Octopus is a complete IP67 Industrial Ethernet solution in which all components use M12 D connector technology as a common interface
More Hirschmann connectors available from stock
(September 2004)
Morvan has broadened its range of Hirschmann connectors by adding rectangular connectors with metric thread cable entries
Connector tool avoids skinned knuckles
(November 2003)
Trying to tighten or loosen M12 and M8 cable connections under harsh industrial conditions with poor access will be a nightmare of the past thanks to the novel Screwty tool
News on the Industrial RJ45 and M12 connectors from Phoenix Electronics Distribution
(October 2003)
A new range of industrial RJ45 and M12 connectors is available in IP20, IP65, IP67 and IP68 variants
Quick-fit solutions for Industrial Ethernet
(September 2003)
Harting has made a number of additions to its RJ Industrial Ethernet connector family which feature IP67 class protection against dirt, dust and fluids
Tiny integrator brings signals together
(September 2003)
The SAI-M5 sensor-actuator integrator is the smallest passive integrator on the market, making it suitable for industrial control applications where compact size and low weight are a necessity
News on the Hirshmann M12 circular connectors from Warwick Test Supplies
(July 2003)
Hirshmann's new ranges of M12 circular connectors with integrally moulded leads are manufactured in male and female, straight or angled, three-, four-, five- or eight-pole versions