Laurence Marchini, Editor, writes:
We see from your search that you're looking for information on the term "PCB mounting",
and we have a large number of manufacturers' news releases and technical articles here on Electronicstalk which will be of interest.
Let me be your guide.
Start with
the news release IEC-inlet filters adopt slimline form from
Tyco Electronics UK, which we summarised at the time by saying "SRB filters are fully shielded and available with various capacitance values".
A couple of weeks before,
we featured the news release Laser pump diodes power up to 10W from
Pacer International: "Target industrial markets include pumping fibre lasers, diode-pumped solid state lasers, uncooled fibre amplifier and direct material processing".
In December 2007, we covered the news from Lambda
concerning its ZPSA power supply range
- take a look at Single-output supplies keep a low profile
which says: "An ideal choice for applications ranging from video/audio routers, datacomms, point of sale equipment, low power LED signs and lighting".
Take a look also at the news release from Link Microtek, Wound delay lines cover 30kHz to 2GHz range,
as well as Antennas promise optimum range and reliability from RF Solutions,
and Switches and indicators save panel space from Live Electronics.
See also:
Improved design for handheld enclosures
(July 2007)
Attractive handheld enclosures include screw-on access plates on the base section, offering easier access for maintenance and battery replacement
Ethernet connectors are sealed on the panel
(June 2007)
Waterproof Ethernet connectors are now available for PCB mounting and IDC termination
A case of adaptability answers many demands
(June 2007)
Small plastic instrument cases have the versatility to handle a wide variety of OEM, consumer electronics, electrical and instrumentation applications
Current transducers go straight onboard
(May 2007)
Surface-mount single +5V supply current transducer reduces manufacturing costs
PCB mounting meets bandwidth requirements
(April 2007)
Cambridge Connectors' new PCB edge mounting style provides a straight signal path along the connector, through the point of interface and onto the PCB track
Sensor offers handheld interface possibilities
(April 2007)
Subminiature tilt sensor indicates direction of tilt, offering new opportunities to enhance the user interface of mobile phones and other portable consumer electronics
LED display comes out into the sunshine
(March 2007)
LED-display digital panel meters answer growing market requirement for displays that can be used in very high ambient light conditions, but can also dim themselves in poorer light
BNC connector comes in two parts
(February 2007)
Removing boards from broadcast mixers, switches or routers, when in service, is usually a time consuming and costly operation because all the related cables first have to be disconnected
PIR sensor enables much smaller designs
(February 2007)
Surface mount pyroelectric infra-red sensor offers dramatically reduced footprint, easy automatic PCB mounting and lower cost
Slimline enclosures hold a PCB or two
(January 2007)
Extruded aluminium enclosures are slimline units designed to accept one or two circuit boards mounted horizontally directly into slots in the walls of the unit
Potentiometers are made to customer specifications
(January 2007)
Omeg specialises in the production of potentiometers made especially to customer specifications
Flexible interconnect system saves space
(November 2006)
A sophisticated high-performance flexible interconnect system offers design engineers and system builders a compact alternative to traditional options
Current transducers save space and weight
(October 2006)
Midas current transducers from MRC Components offer a wide range of measurement and control options using galvanic separation of alternating current
Power entry modules are made for PCB mounting
(September 2006)
Compact PCB-mounting power inlet modules are ideally suited for use in equipment with low headroom, particularly in IT and telecomms infrastructure
Small enclosures are saved from the scrapheap
(August 2006)
The Clipper family is an entry level flameproof ABS enclosure, intended for housing small PCBs for handheld applications
Modules range from commercial to medical uses
(July 2006)
The Tracopower TMT series of ultracompact AC/DC power modules have approvals that make them suitable for a wide range of commercial, industrial and medical applications
RoHS Directive switches materials
(May 2006)
This article looks at the implications of the RoHS Directive on the switch industry
Module turns COTS convertors to military specs
(April 2006)
A filtering and active surge suppression module enables fast design of military specification power systems using economical industrial DC/DC convertors
Interconnect system meets storage industry demands
(March 2006)
The new low-profile iPass interconnect system offers the storage industry increased speed and high density and meets the highest industry standards in today's market
Coaxial connectors are commercial option
(January 2006)
A new range of RoHS compliant RF coaxial connectors offer a cost effective and reliable solution for commercial applications
Relays switch to RoHS compliance
(January 2006)
Crydom has made significant investment in realising a full range of RoHS compliant products, with some compliant ranges already available to customers
Show spotlight for lead-free connectors
(December 2005)
Phoenix Contact will be presenting the topic 'Lead free PCB connection technology for your supply chain' during the seminar programme at the Southern Electronics Exhibition in February 2006
Small claims for sensor connectors
(November 2005)
Binder connectors in the popular 707 M5 series have been expanded to include versions with dip solder contacts for PCB mounting and front mounted versions with single wires
Surface-mount convertors save space onboard
(October 2005)
Lambda has released surface-mount versions of its successful PSS and PSD series of ultracompact single and dual DC/DC convertors for PCB mounting
Interconnect system speeds disk access
(September 2005)
With its increased speeds and high density, the new iPass interconnect system can support standard Serial Attached SCSI and Serial ATA high-speed, multilane internal and external systems
Catalogue features six new resistor families
(July 2005)
Ohmite has made its latest catalogue available in both hard copy and CD formats
Low value resistors suit current sense uses
(July 2005)
The new 610 and 650 Series four terminal bare element resistors from Ohmite provide ultralow resistance values (to 0.005ohm) for relatively high current requirements
Enclosures bring electronics to hand
(June 2005)
Tekbox handheld enclosures have been designed for modern electronics on the move
Antennas aid low-power radio
(June 2005)
A new range of surface-mount antennas is designed for 433 and 868MHz ISM band applications
Open-board convertors cut weight, cost and size
(April 2005)
ETA-Power's OTQ-SC/WC range of DC/DC convertors were developed to meet the demand for distributed power and are designed specifically for PCB mounting applications
Powerful relay shows its sensitive side
(April 2005)
RT series relays from Tyco Electronics combine high power and sensitivity, resulting in devices that are ideal for applications such as domestic appliances, heating control and emergency lighting
PCB mounting accepts solder connectors
(March 2005)
Available in 4, 6, 8, 10 and 12 way, Bulgin's smallest waterproof connector is available in a PCB mounting panel version and is ully dust and waterproof to IP68
UHF FM receiver module has signal indicator
(March 2005)
A UHF FM receiver module with RSSI for simple implementation of wireless data links is an updated Radiometrix RX2 but replaces the carrier detect with a received signal strength indicator
Compact waterproof connector comes onboard
(March 2005)
Bulgin's smallest waterproof connector, the 400 series Buccaneer, now includes a PCB mounting version