‘Process Monitoring’
An Electronicstalk guide
Start with the news release
Power supplies can be provided in 2U rack mount from
Safety Power, which we summarised at the time by saying "Safety Power has launched a range of high-quality 3,000W analogue power supplies that can be supplied in 2U rack mount or as an installation unit for mounting-board assembly applications. ".
Several months prior to that,
we featured the news release Radicom Research launches medical-certified modems from
Radicom Research: "Radicom Research has announced its line of medical-certified dial-up modems for OEMs.".
In March 2010, we covered the news from Campbell Collins
- take a look at Campbell Collins demonstrates Ericsson converters
which says: "Campbell Collins is able to demonstrate Ericsson Power Modules' range of digitally controlled DC/DC converters and point-of-load voltage regulators using the 3E evaluation kit and software.".
Take a look also at the news release from BVM, BVM launches fanless PC for embedded applications,
as well as Hectronic COM modules have extended temperatures from Hectronic,
and EMKA designs customised cabinet hardware from EMKA.
Latest stories...
Placement machines perform error-free assignment (March 2010)
SMD placement machines from Essemtec can identify the PCB using a barcode label.
ATS is solution to high-integrity no-break power (March 2010)
Gresham Power Electronics has released the automatic transfer switch (ATS), a power switching and management module.
4DSP boards use FPGA mezzanine card standard (March 2010)
The release of eight analogue-to-digital/digital-to-analogue boards based on the FPGA mezzanine card standard (FMC) has been announced by 4DSP.
Trigon announces low-profile power inductor (March 2010)
Trigon has introduced its IRHL2D10P (3x3x1mm) low-profile power inductor.
Converter powers energy-monitoring systems (March 2010)
Bear Power Supplies has designed a custom power supply for a provider of smart meters and data collection systems.
Timing analysis tool addresses speed limitations (March 2010)
Magma Design Automation has unveiled Tekton, a timing analysis platform that is claimed to offer higher capacity and faster runtimes than traditional tools, without sacrificing accuracy.
LTC6801 device monitors up to 12 battery cells (March 2010)
Linear Technology has announced the LTC6801, a high-voltage battery stack fault monitor that operates without a microprocessor and without the need for optocouplers or isolators.
Baolab NanoEMS constructs MEMS within CMOS wafer (March 2010)
Baolab Microsystems has launched a new technology to construct nanoscale micro electro mechanical systems (MEMS) within the structure of the CMOS wafer using standard, high-volume CMOS lines.
Further reading
-
Xsilogy to use wireless for process monitoring
Ember Corp has teamed up with Xsilogy to develop the next generation of wireless systems for managing demanding industrial processes in chemical, energy and industrial water treatment applications.
