Latest news on Electronicstalk categorised by product type
EMC Components
Archive page 11 of 17
Our RSS feed for EMC Components press releases
DSL filter overcomes capacitance limits
Pulse has introduced a new dynamic customer premises equipment (CPE) filter designed to improve digital subscriber line (DSL) broadband services in Europe.
News from Pulse (19 November 2004)
Filter cleans up handheld displays
A new EMI filter for LCD driver lines will be used in mobile, computing and consumer applications that are subject to increasing interference from wireless applications.
News from STMicroelectronics (16 November 2004)
Ferrite toroids aid SMPS suppression
Steward has extended its range of ferrite products to include T-Series toroids in diameters ranging from 6 to 36mm.
News from Steward (15 November 2004)
Ferrite rod range offers designers flexibility
A new range of ferrite rods from Steward will allow designers to make wound components for a variety of radio frequency and EMI suppression applications
News from Steward (15 November 2004)
Surface mount power inductors meet needs
The NPI and NPIS series of surface mount power inductors from NIC Components meet the needs of the industry wide trend for low voltage, high current circuit operation.
News from NIC Eurotech (15 November 2004)
Award recognises commitment
Schaffner's distributor award recognises Anglia's rapid sales growth of almost 70% over 2003 as well as having registered the highest number of original design-in projects out of all distributors. Brochure available
News from Schaffner EMC ( 8 November 2004)
Ferrites and filters combine and protect
New ferrite beads offering high impedance in the gigahertz range address the issue of HF noise in miniature portable applications such as handsets.
News from Micromark C and CD ( 1 November 2004)
Toroids aim to optimise Ethernet performance
Steward is using Electronica 2004 to showcase its latest ferrite products for inductive and EMI filtering applications.
News from Steward (21 October 2004)
Inductors keep it quiet on the surface
The 4700 and 4800 series of surface mount inductors from C and D Technologies offer enhanced design flexibility coupled with EMI protection. Brochure available
News from C and D Technologies (NCL) (19 October 2004)
High-current chokes suit new processor designs
ACE has developed a new range of SMD chokes for the latest laptop, PC and server board designs.
News from MRC Components (12 October 2004)
UK operation celebrates 20 years
Schaffner celebrates 20 years of trading in the UK in September 2004. Brochure available
News from Schaffner EMC ( 1 October 2004)
Schaffner attacks Electronica on two fronts
Schaffner will have a dual presence this year at Electronica. Brochure available
News from Schaffner EMC (17 September 2004)
Cores optimise choke applications
Mecagis has a wide range of standard nanocrystalline cores for use in common mode chokes.
News from Mécagis (18 August 2004)
Drive filters take military standards onboard
EMC Solutions has a new range of input and output filter sets designed to ensure that variable speed drives meet Def-Stan-59-41 and MIL-STD-461/462 emission levels for below-deck use.
News from EMC Solutions ( 6 August 2004)
Temperature variable attenuator goes coaxial
The popular temperature variable attenuator Thermopad from EMC Technology now comes in a coaxial package.
News from Smiths Interconnect - EMC Technology ( 3 August 2004)
Four out of five EMC components cut out the lead
Wurth Elektronik now offers 80% of its existing product range as lead-free devices.
News from Wurth Elektronik UK (15 July 2004)
Snappy answer to EMI problems
The new Star Gap range of snap-on ferrites is especially helpful for EMI problems in the frequency range 100MHz to 2.5GHz.
News from Wurth Elektronik UK (15 July 2004)
Budget solution in powerline chokes
Epcos is offering designers a new low-cost solution for their powerline choke needs with the introduction of its new E-core series, based on EF20 cores.
News from Epcos ( 6 July 2004)
Toroids provide high-temperature suppression
Toroids made from the nanocrystalline material Nanoperm are finding increasing use in modern power electronics.
News from Magnetec (23 June 2004)
Filters help with machine tool compliance
Micromark C and CD has a new range of filters to meet the product specific standard for EMC compliance in machine tools, EN50370.
News from Micromark C and CD (23 June 2004)
Earlier news from this category...
Latest news from this category...
