Latest news on Electronicstalk categorised by product type
PCB Connectors
Archive page 24 of 26
Our RSS feed for PCB Connectors press releases
Fine-pitch connectors take the shocks
FF01 low-profile 0.5mm fine-pitch connectors from JAE are designed for rapid assembly, improved mating reliability and high shock resistance.
News from JAE Europe ( 4 March 2002)
Edge card connector supports 10Gbit Ethernet
Molex has released its 70-pin PCB-mounted edge card connector for the emerging 10Gbit family of z-axis pluggable transceivers.
News from Molex UK (28 February 2002)
Adaptable IEEE1386 connectors
New from Flint is a range of adaptable board-to-board connectors for IEEE 1386 Common Mezzanine Card (CMC) applications, that accommodate a wide range of interboard spacings.
News from Flint (27 February 2002)
High-speed interconnects in differential pairs
Genalog can now supply high-speed interconnects in differential-pair configurations that allow electrical performance at up to 5GHz operating frequencies.
News from Genalog (20 February 2002)
1.27mm-pitch for rugged micro interconnects
Now available from Genalog, new rugged micro interconnects on a 1.27mm pitch have been designed for applications requiring blind mating and/or a high number of mating cycles.
News from Genalog (17 January 2002)
SM connectors aim for high-datarate integrity
Honda Connectors has a new range of surface-mount connectors specifically designed for high-speed signal interfaces such as Ultra SCSI-320, PCI-X and future Ultra SCSI-640.
News from Honda Connectors (11 January 2002)
Developers kit previews serial storage interfacing
Molex has played a lead role in designing and specifying the standard for connectors and cables that support the new Serial ATA 1.0 platform.
News from Molex UK (30 November 2001)
Interfaces accomodate cooling spaces
Genalog can now supply matched impedance and high-speed micro-pitch interfaces for applications requiring elevated designs.
News from Genalog (21 November 2001)
2mm connectors support high-speed backplanes
F-Pack-3 (FCN-086 series) hard metric 2mm connectors from Fujitsu are available in the UK from Young ECC.
News from Young-ECC Electronics (24 October 2001)
Hard metric 2mm connectors take the heat onboard
Harting has introduced a number of new devices in its har-bus HM+ range of hard metric 2mm connectors, which are compatible with the latest high-temperature SM production processes.
News from Harting (22 October 2001)
Industrial connecters adapt to PCBs
A new range of adapters for interfacing industrial connectors to PCBs has been introduced by Harting.
News from Harting (12 October 2001)
I/O connector runs up to 5Gbit/s
Specifically designed for Infiniband applications, the SpeedPac I/O connector enables the processor to operate at optimum speed and thus removes the historical bottleneck of the PCIbus I/O bandwidth. Brochure available
News from Tyco Electronics UK (12 October 2001)
Elevated high-speed interface options
Samtec now offers an expanded choice of micro pitch interfaces for matched impedance and high-speed applications that require elevated designs with board spacings greater than 16mm. usuall
News from Samtec (27 September 2001)
New MD aims to double sales at JAE Europe
JAE Europe has appointed Jin Nishio as Managing Director.
News from JAE Europe (19 September 2001)
Coplanar board mating interconnects
Genalog can now supply a range of interconnects for both micro and standard applications that enable printed circuit boards to be mated in the same plane.
News from Genalog (18 September 2001)
Anglia has designs on JAE connectors
JAE Europe has appointed Anglia as a major 'design in' distributor in the UK.
News from JAE Europe (11 September 2001)
Tiny backplane connectors support InfiniBand
Even smaller than previous HSSDC backplane connectors from Tyco Electronics, the HSSDC 2 has been designed to meet 2.5Gbit/s InfiniBand 1x server I/O requirements as well as 2.1Gbit/s Fibre Channel sm Brochure available
News from Tyco Electronics UK ( 4 September 2001)
SIM card connector keeps a lower profile
Now available from JAE, an ultra-low-profile SIM card connector is set to save space and reduce weight in mobile phone handsets at the same time as simplifying final assembly.
News from JAE Europe (23 August 2001)
One-piece interfaces on 1mm pitch reduce cost
Deltron Roxburgh is introducing new one-piece interfaces on 1.0mm pitch, with a choice of spacing from 1.65 to 9.9mm between boards.
News from Deltron Roxburgh (22 August 2001)
Fine-pitch connectors shift data more reliably
Honda has extended its 0.8mm-pitch HDRA family of high-quality high-density shielded interconnect solutions with a new version handling solid 28AWG, in a robust low-cost package.
News from Honda Connectors (16 August 2001)
Earlier news from this category...
Latest news from this category...
