Latest news on Electronicstalk categorised by product type
PCB Connectors
Archive page 21 of 25
Our RSS feed for PCB Connectors press releases
Link simulation resolves performance/cost equation
To assist OEMs in the design and verification of interconnection links, FCI has a simulation service that defines complete solutions that simultaneously optimise high-speed performance and cost.
News from FCI (27 November 2002)
Budget price for PCI edge card connectors
Raycon Technology has a new line of right-angle PCI edge card connectors available in 3.3 and 5.0V versions.
News from Raycon Technology (21 November 2002)
Headers and sockets aid high-density interconnects
High-density four-row surface-mount headers and sockets from Genalog provide up to 200 inputs/outputs in less than 1in2 and are available with a choice of four PCB stack heights.
News from Genalog (15 November 2002)
Smallest hard drive connects a big future
User application article Working with engineers from Toshiba, Fujikura DDK has developed a novel range of connectors which are an integral part of the world's smallest hard disk drives.
News from Fujikura Europe - DDK Connector Division ( 8 November 2002)
Futurebus data connectors
The Harwin Futurebus connector system is based on a modular 2mm grid for high-density high-speed signal board-to-backplane applications at a datarate of 0.622Gbit/s.
News from Genalog ( 7 November 2002)
Hard metric backplane connectors run to 6.4Gbit/s
New high-speed differential signal interconnection for next generation 6.4Gbit/s telecomms backplanes and high-speed measurement/control systems has been added to Honda's NCB hard metric series.
News from Honda Connectors (18 September 2002)
Software aids interconnect specification
A new software package speeds the selection of PCB connectors from the Combicon range. Brochure available
News from Phoenix Contact (17 September 2002)
Smart-card connector takes in solenoid ejector
Amphenol-Tuchel has added a solenoid eject version to its current Superflat Pushmatic chip card connector series, with outer dimensions not much larger than the standard ISO7810-sized card itself.
News from Trident Infotec (16 September 2002)
Board-to-cable connector loses its pins
ODU has introduced surface mount versions of its 2.54mm grid Flakafix IDC board-to-cable connector, which can also be specified in straight or right angle form.
News from ODU UK (13 September 2002)
Website dedicated to dual-source connector family
Molex and Teradyne Connection Systems Division have codeveloped a new website to give customers easy access to in-depth information about the VHDM-HSD family of connectors.
News from Molex UK (12 September 2002)
Orthogonal arrangement boosts backplane speed
Apart from being the highest-density backplane connectors on the market, the HSHM series also has dramatic implications for the speed and density of interconnect that is possible.
News from 3M Electronics and Interconnect Solutions (10 September 2002)
Micro connectors pack in the contacts
A new range of 0.8 and 1mm pitch micro pin-and-socket connectors significantly increases interconnect density for small-form-factor microminiature applications.
News from Genalog ( 9 September 2002)
High retention for PC/104 connectors
Now available from Genalog are a new range of PC/104 and PC/104+ connectors, both stackthrough and non-stackthrough with 2.54 pitch and 2mm pitch, manufactured by Samtec.
News from Genalog ( 3 September 2002)
Ultrafast connectors for next-generation storage
Honda is to support the next generation communications architecture for high performance storage - Serial ATA - with a new family of 1.5Gbit/s connectors.
News from Honda Connectors (20 August 2002)
Low profile for IDC ejector headers
Genalog can now supply a range of Samtec low profile IDC ejector headers to mate with 1.27 and 2.54mm IDC cable systems in addition to the popular 2mm IDC cable system.
News from Genalog (15 August 2002)
Passive mechanical switching connector for VME64x
The new har-bus 64S from Harting is a passive mechanical switching connector for use in systems based on the VME64x bus.
News from Harting (13 August 2002)
Quality edge for card connectors
Available now from In2Connect is the Micro Plastics range of card edge interconnection solutions.
News from In2Connect (13 August 2002)
Modular basis for Futurebus connector range
Genalog has a new modular 2.00mm grid connector system for use in telecomms, networking and high-end computing applications.
News from Genalog (12 August 2002)
Hard metric range runs gigabit backplanes
Genalog in partnership with Harwin and Starconn has a range of modular 2.00mm grid system connectors for high density, high-speed board-to-backplane applications.
News from Genalog ( 9 August 2002)
High-density connectors aid gigabit backplanes
An innovative range of high-speed backplane connectors from 3M offers high speed and unparalleled density levels to developers of multigigabit backplane systems.
News from 3M Electronics and Interconnect Solutions ( 2 August 2002)
Earlier news from this category...
Latest news from this category...
