Latest news on Electronicstalk categorised by product type
DC/DC Convertors
Archive page 27 of 37
Our RSS feed for DC/DC Convertors press releases
Full-brick convertors put 500W on intermediate bus
Two new 500W DC/DC convertors extend the options in powering 12V DC intermediate bus architecture applications.
News from Advanced Power Conversion (20 October 2003)
SMD convertor saves space at the point of load
The Y5117P is heralded as the industry's first surface mountable, vertical SIP point-of-load convertor.
News from Power-One (16 October 2003)
DC modules build up multikilowatt power systems
Advanced Power Conversion has a new DC/DC bulk power system primarily intended for telecomms service providers.
News from Advanced Power Conversion (13 October 2003)
Half bricks aim for high-current applications
A new line of high-current high-efficiency half-brick DC/DC convertors can deliver up to 100A output current in a single-board open-frame package. Brochure available
News from SynQor Europe (26 September 2003)
Baker supports distribution across Europe
The Power Electronics Division of C and D Technologies has strengthened support for its distribution channel with the appointment of Gary Baker to the role of European Distribution Account Manager. Brochure available
News from C and D Technologies (NCL) (22 September 2003)
Isolated POL convertor sets new records
Vicor has released its first VI chip voltage transformation module (VTM), the V048K015T80.
News from Vicor UK (18 September 2003)
Spectrum to add Italian coverage
Artesyn Technologies has appointed Spectrum Group Italia as its representative in the Italian market.
News from Artesyn Technologies ( 9 September 2003)
High-current POL convertors support IBA
Nonisolated, point-of-load convertors boast 85-96% efficiencies at competitive prices to help the intermediate bus architecture (IBA) gain respect.
News from Datel (UK) (18 August 2003)
Power chips replace quarter-brick convertors
Vicor has adapted its new VI chips to the footprint and pinout of a telecomms-standard, through-hole quarter-brick intermediate bus "DC transformer".
News from Vicor UK (13 August 2003)
Eighth-brick family gains 1.2V output
The industry's smallest 50W DC/DC convertors now include a new single-output device that delivers the low voltages demanded by modern ASIC- and DSP-based designs. Brochure available
News from C and D Technologies (NCL) ( 7 August 2003)
Slimline SIP convertor delivers up to 100V
Housed in an ultra-thin (4mm) miniature single-inline package, the new SIP100 from Emco High Voltage Corporation offers high performance while maintaining low costs for high volume applications.
News from Emco High Voltage Corp (29 July 2003)
Convertors gain shutdown and trim options
C and D Technologies has extended its range of low profile, high-efficiency nonisolated DC/DC convertors with a new 10W device that incorporates shutdown and voltage trimming functionality. Brochure available
News from C and D Technologies (NCL) (23 July 2003)
Lower-current quarter bricks fill market gap
Datel reckons its latest quarter-brick range fills a glaring price/performance void in the DC/DC product landscape.
News from Datel (UK) ( 9 July 2003)
Convertors provide high-density redundant supply
TPCMQ48 Series DC/DC convertors produce 12V DC at 54.2A or 24V DC at 29.2A; the input voltage is a nominal 48V DC with a wide range of 40 to 60V DC. Brochure available
News from Unipower Europe ( 8 July 2003)
Quarter bricks house two independent convertors
A new line of dual-output quarter-brick DC/DC convertors with independent regulation can deliver 15A of total output current on each rail simultaneously, without a heatsink. Brochure available
News from SynQor Europe ( 2 July 2003)
Award for power over Ethernet range
PowerDsine has won the award for most innovative product at the Networking Industry Awards 2003.
News from PowerDsine UK ( 1 July 2003)
Convertors provide a boost to legacy equipment
A new range of cost-effective, flexible and scalable convertors can power new 48V devices from 24V legacy power systems, extending the life of the installed equipment.
News from Advanced Power Conversion (30 June 2003)
Convertors pack more power into smaller spaces
A new series of 12V-input point-of-load DC/DC convertors offers state-of-the-art performance to support leading-edge product designs.
News from Artesyn Technologies (25 June 2003)
Rembaum takes over investor relations
Artesyn Technologies has appointed Pamela Rembaum as Director of Investor Relations.
News from Artesyn Technologies (25 June 2003)
Trio to collaborate on point-of-load designs
Artesyn, Astec Power and TI have formed a point of load alliance to offer customers pin-compatible power supply footprints that provide the same functionality and form factors.
News from Texas Instruments (18 June 2003)
Earlier news from this category...
Latest news from this category...
