Latest news on Electronicstalk categorised by product type
Embedded Computing and Control
Archive page 20 of 48
Our RSS feed for Embedded Computing and Control press releases
FPGA adds flexibility to digital I/O module
The GPIO-MM is a highly flexible and reconfigurable PC/104 digital I/O module based on a Xilinx Spartan II FPGA.
News from Diamond Systems ( 4 April 2006)
Core modules speed embedded development
The RCM3305 and RCM3315 microprocessor core modules are an ideal solution for designers who want to rapidly develop serial Flash and 10/100Base-T Ethernet into their embedded application.
News from Impulse (28 March 2006)
Motion control card runs off Ethernet power
The FMOD-IPDCMOT is the first motion control card to use an Ethernet bus to communicate data and supply power at the same time at distances up to several thousand metres.
News from Saelig Company (28 March 2006)
Dividend payment keeps shareholders happy
Following record sales figures in the fourth quarter, Kontron is to make its first dividend payment to shareholders since going public in 2000.
News from Kontron UK (24 March 2006)
Embedded board extends Geode roadmap
A next-generation board based on the AMD Geode GX CPU is set to continue the processor's success story in embedded long-life low-power fanless computing.
News from Arcom (24 March 2006)
Motherboard embeds power of Core Duo
The EMB-945T with mobile-optimised Intel dual-core processors is the latest embedded motherboard designed to cope with increasingly heavily work-loaded embedded systems.
News from Aaeon (23 March 2006)
More speed for embedded machine engines
The latest additions to the Adlink GEME series of general embedded machine engines offer speed improvements while maintaining the advantages of low voltage operation and a fanless heat spreader.
News from Acal Microsystems (22 March 2006)
EBX format board promises top value
Costing less than GBP 200 for minimum quantities, the new EBX format Vega86-6240 has a range of features which would normally be found in a far more expensive computer.
News from Icop Technology (UK) (16 March 2006)
Eden-based boards will be available until end 2007
By offering this long-term availability for VIA Eden processors, Kontron is safeguarding its customers' investment in RoHS-compliant boards and computers-on-modules.
News from Kontron UK (14 March 2006)
PC/104 module embeds eight serial ports
The Emerald-MM-8P PC/104 offers eight multiprotocol serial ports on a single PC/104 module with complete software configurability.
News from Diamond Systems (13 March 2006)
Industrial computer acts as reference design
After designing display-enabled products for its customers for years, Techsol is now offering a standard, off-the-shelf computer with a colour LCD and touch panel.
News from Technical Solutions ( 7 March 2006)
Advantech opportunity knocks for Impulse
Impulse Corporation has been appointed as a UK distributor for Advantech products.
News from Impulse ( 6 March 2006)
CPU slots in to upgrade designs to RoHS compliance
The Aaeon Technology PFM-550S is billed as an ideal replacement for end-of-life modules that use non-RoHS-compliant components.
News from Impulse ( 6 March 2006)
Module makes light of complex applications
An ARM7-based module has the processing power and sufficient memory resources to host an embedded TCP/IP stack, an embedded web server and the user's complex application.
News from Helping Hand Software ( 6 March 2006)
FPGA modules upgrade DSP with Virtex-4
The Heron-FPGA12 is the first in a range of modules with Xilinx Virtex-4 FPGAs.
News from Hunt Engineering ( 6 March 2006)
Mini-ITX motherboard aims for industrial uses
The MB877 Mini-ITX motherboard is based on the ATi RS400 chipset and targets applications such as gaming, POS, medical, terminals and industrial automation.
News from IBase Technology (27 February 2006)
Computer-on-module upgrades ETX baseboards
A new computer-on-module allows OEMs to access the latest chipset technology without a complete redesign of their ETX baseboard.
News from Ampro Computers (27 February 2006)
Frugal ETX module targets portable applications
Ampro Computers has developed the world's first rugged ETX module with full notebook-style ACPI 2.0 power management.
News from Ampro Computers (27 February 2006)
Hybrid processor rips through signal processing
The V4DSP FPGA/PowerPC processor combines dual Virtex-4 FPGA processing nodes together with a Freescale MPC7448 PowerPC processor operating at speeds up to 1.4GHz.
News from Radstone Embedded Computing (23 February 2006)
Compact embedded controller goes fanless
The JRex-Ibox features Intel Pentium M processors up to 1.8GHz, has many interesting features, and is also now available as a fanless unit.
News from Kontron UK (23 February 2006)
Earlier news from this category...
Latest news from this category...
