Latest news on Electronicstalk categorised by product type
Compliance Engineering
Archive page 8 of 41
Our RSS feed for Compliance Engineering press releases
Measurement platform monitors MPEG-2
Rohde and Schwarz' R and S DVM measurement platform now features ATSC/8VSB and J.83/B, and is able to support further RF standards.
News from Rohde and Schwarz ( 8 May 2007)
Web seminar explains validation shortcuts
Intertek will conduct a free 60 minute webinar later this month on the subject of "Component versus system level validation".
News from Intertek ( 8 May 2007)
EMC lab gains accreditation from car makers
Shanghai-based lab is certified as an A2LA (American Association for Laboratory Accreditation) accredited laboratory under AEMCLRP program for EMC testing.
News from Intertek ( 7 May 2007)
Companies combine to verify wireless equipment
Companies collaborate to produce an integrated and efficient means of verifying baseband designs with dynamic, accurate, bidirectional network simulations of embedded systems.
News from Anite Telecoms ( 4 May 2007)
Recycling company makes US acquisition
One of North America's largest recyclers has had its end-of-life recycling assets acquired by a UK recycling company.
News from Sims Recycling Solutions ( 4 May 2007)
Chip-maker alliance to aid WiMAX development
Anite and Beceem Communications have agreed align product roadmaps as part of a deep technical collaboration for WiMAX 802.16e.
News from Anite Telecoms ( 3 May 2007)
Waveform generator tests serial data receivers
The Tektronix AWG7000 arbitrary waveform generator has been approved for direct synthesis testing of Serial ATA data receivers. Brochure available
News from Tektronix ( 2 May 2007)
Production tester ensures meter compliance
User application article An integrated test cell developed around the Hal production line test system ensures regulatory compliance for Ampy Metering. Brochure available
News from Clare Instruments ( 2 May 2007)
IT recycler is approved for WEEE
AMI is the first recycling business in the UK to be granted approval to operate as an Approved Authorised Treatment Facility under the WEEE Regulations.
News from Asset Management Ireland (AMI) (25 April 2007)
Nortel signs for the three Rs of WEEE
Telecomms giant Nortel has appointed Sims Recycling Solutions as its strategic European partner for the recovery, redeployment and recycling of end-of-life electronic equipment.
News from Sims Recycling Solutions (25 April 2007)
HDMI test package stands the test of compliance
User application article Following an evaluation period of three months, Silicon Image has specified an HDMI 1.3 compliance test package for use in all of its authorised test centres.
News from Agilent Technologies Europe (24 April 2007)
Spanish lab joins CB Scheme
SGS Tecnos in Spain has been recently accepted by the IEC into the IECEE CB Scheme. Brochure available
News from SGS (24 April 2007)
The importance of earth bond testing
Technical background article John Barnett details new developments in earth bond testing and explains its role as part of the mandatory requirement for electrical safety testing of products in a production environment. Brochure available
News from Clare Instruments (23 April 2007)
Novel safety tests don't destroy control ICs
User application article Specially developed electrical safety testing equipment has helped Electrolux to develop a new range of electronic controlled cookers. Brochure available
News from Clare Instruments (23 April 2007)
Taskforces spearhead StEP initiative in the UK
Dataserv is taking a pioneering role in raising awareness of the hazards of e-waste and promoting the creation of global standards in the processes of recycling electronic scrap.
News from Dataserv (23 April 2007)
Scheme to encourage electrical waste management
More than enough retailers to make a success of an industry-wide scheme to offset requirements to collect used electrical/electronic equipment under the WEEE directive have already joined .
News from Valpak (20 April 2007)
Signal generators upgrade for LTE compliance
A new option turns the R and S SMU200A, SMJ100A and SMATE200A into the world's first generators for LTE signals.
News from Rohde and Schwarz (19 April 2007)
Layout software links up with electron microscope
Layout visualisation software can now be used with scanning electron microscopy to develop test routines for highly accurate measurement of semiconductor masks.
News from Vistec Semiconductor Systems (18 April 2007)
Companies combine to make masks accessible to test
Two companies collaborating on making masks easier to test.
News from Clear Shape Technologies (18 April 2007)
Universal comms tester gets wireless upgrade
The CMU200 universal communications tester now supports CDMA2000 1xEV-DO Revision A, the latest enhancement to the CDMA2000 family of standards that are being deployed by wireless service providers.
News from Rohde and Schwarz (18 April 2007)
Earlier news from this category...
Latest news from this category...
