Latest news on Electronicstalk categorised by product type
Stand-Alone Instruments
Archive page 9 of 94
Our RSS feed for Stand-Alone Instruments press releases
Oscilloscope deal reached for UK market
Aspen is now able to offer a wide choice of oscilloscopes from five different manufacturers with bandwidths from 20MHz to 1GHz
News from Aspen Electronics (19 November 2007)
Sensors offer accurate resistance measurement
True four-wire resistance measurement eliminates lead resistance errors, while auto averaging and automatic temperature compensation increases true measurement accuracy. Brochure available
News from Cropico (19 November 2007)
Waveform generator sets serial standard
User application article Testronic Labs is the first test laboratory in Europe to provide precertification for SATA products using the AWG7000 arbitrary waveform generator. Brochure available
News from Tektronix (15 November 2007)
Microwave frequency counter is improved
The MF2400C series is a general-purpose instrument designed for measuring burst signal, carrier frequency and pulsewidth.
News from Anritsu (UK) (14 November 2007)
Catalogue adds 50 further test tools
Latest publication features portable multimeters, clamp meters, power quality analysers, circuit tracers, component checkers, HVAC testers and speciality electrical testers.
News from Amprobe Test Tools (13 November 2007)
Safety tester meets latest medical standard
Lightweight and long life battery powered tester is equipped with Bluetooth technology for the wireless connection of barcode scanners, label printers and other accessories.
News from Rigel Medical ( 9 November 2007)
Network tests ease technology development
The features introduced on Spirent Landslide, Spirent Protocol Tester and Spirent Abacus 5000 enable the industry to overcome the complexities of testing converged technologies.
News from Spirent Communications (31 October 2007)
Sensor detects diffuse materials
Optek Technology's OPB609 sensor is housed in a black opaque package, features a high-speed phototransistor output and is unfocused, allowing it to properly sense diffuse surfaces
News from Optek Technology (30 October 2007)
Oscilloscope software monitors jitter
DPOJET maximises the timing and jitter measurements of complex clock, digital and serial data signals. Brochure available
News from Tektronix (29 October 2007)
Test solution suits DisplayPort 1.1 standard
The DisplayPort test solution consists of a DSA70804 8 GHz real-time oscilloscope with new DPOJET Advanced software. Brochure available
News from Tektronix (26 October 2007)
Laboratory resources offered in portable package
The ONT-503 is suitable for users who share resources and need to use one test instrument across different departments and sites.
News from JDSU (24 October 2007)
RF test platform handles 6GHz
Aeroflex' RF test platform system incorporates PXI 3000 series hardware modules, PXI Studio software with new measurement plug-ins and a new PXI instrument chassis to tie it all together.
News from Aeroflex (15 October 2007)
Convertors expand available frequency range
The R and S ZVA-Z110 millimetre-wave convertors provide access to frequency bands needed for vehicle distance radar and aerospace and defence applications.
News from Rohde and Schwarz (15 October 2007)
Microwave generator achieves high frequencies
The VCO-based architecture of the MG37020A microwave signal generator integrates advanced RF hardware, enhanced computing and digital interfaces that minimise command and trigger delays.
News from Anritsu (UK) (10 October 2007)
Ethernet analyser cuts testing costs
MetroScope includes a low-cost, Gigabit LinkReflector remote tester that lets carriers perform complete SLA testing with full control from one end of the link.
News from Fluke Networks (10 October 2007)
UK distribution deal reached for instruments
The Geotest range includes Smart PXI chassis, controllers and bus expanders for PXI, PCI and PCI Express.
News from Amplicon ( 9 October 2007)
Optical tester suits ROADM networks
The TLS-55 Smart Optical tester provides a highly accurate method for measuring the true optical signal-to-noise ratio (OSNR) in reconfigurable optical add/drop multiplexer (ROADM) networks.
News from JDSU ( 9 October 2007)
AWGs output any waveform
Each card in the AWG family can run as a signal and test pattern generator or they can be used via an internal synchronisation option together with one of the digitiser cards of Spectrum. Brochure available
News from Spectrum Systementwicklung Microelectronic ( 9 October 2007)
Reporting application tracks handset popularity
Agilent's Handset Revenue Analytics allows operators to determine whether a handset is properly configured, downloads data successfully and connects to the network without a struggle.
News from Agilent Technologies Europe ( 9 October 2007)
Oscilloscopes receive upgrades
Tektronix DPO7000, DPO and DSA70000 oscilloscopes now offer unimpaired signal representation, as well as accurate timing and amplitude measurements. Brochure available
News from Tektronix ( 9 October 2007)
Earlier news from this category...
Latest news from this category...
