Latest news on Electronicstalk categorised by product type
Stand-Alone Instruments
Archive page 7 of 94
Our RSS feed for Stand-Alone Instruments press releases
Scope sets the standard for DisplayPort tests
User application article Full physical layer test coverage for both sink and source of DisplayPort, reducing validation time and drastically increasing DisplayPort product reliability.
News from Agilent Technologies Europe (25 January 2008)
Measurement guide prevents common mistakes
Cropico's Guide to Low Resistance Measurement features tables of wire and cable characteristics, temperature coefficients and formulae. Brochure available
News from Cropico (23 January 2008)
Micro ohm meters provide versatility
The DO5000 has programmable current settings in 100 steps from 10uA to 10A and measures from 3mohm to 30kohm with a resolution of 0.1uohm and +/-0.03% accuracy. Brochure available
News from Cropico (23 January 2008)
Basestation protocol tester covers a wider band
Protocol tester allows infrastructure developers to create and test new GSM basestation software and hardware features by providing a mobile emulation.
News from Aeroflex (15 January 2008)
Oscilloscope handles long and short-term events
Even if it is capturing trend data over a long period of time, the Yokogawa DL750P can still trigger and separately record high-speed signals using the 'dual-capture' mode.
News from TTi (Thurlby Thandar Instruments) (10 January 2008)
Diagnostic controller keeps costs down
The Sorion Rigel VCi3 (versatile communications interface) is a microprocessor-based system that is designed for the communicating, controlling and testing bus-based vehicle systems and sub-systems.
News from Sorion Electronics (10 January 2008)
Generators cover all broadcast requirements
All conventional broadcasting standards are supported: analogue and digital, terrestrial, satellite, cable, mobile TV and digital sound broadcasting.
News from Rohde and Schwarz (10 January 2008)
Multichannel software enables flexible measurement
Software enables each instrument to be used as an oscilloscope, a spectrum analyser, a voltmeter, an arbitrary waveform generator or a transient recorder/datalogger.
News from TiePie Engineering (10 January 2008)
Oscilloscopes turn to FlexRay analysis
Allows automotive designers using embedded MCUs to verify proper signal integrity of their FlexRay signals and effectively debug protocol and signal integrity issues.
News from Agilent Technologies Europe ( 9 January 2008)
Portable analyser enables audio consultancy
User application article Renowned audio engineer Peter Watts reckons the Prism Sound dScope Series III is one of the most sophisticated analysis tools on the market.
News from Prism Sound ( 2 January 2008)
Auntie takes audio analysers on the road
User application article Surround sound audio meters are installed in BBC outside broadcast vehicles used to record sports and entertainment programmes in high definition.
News from DK-Technologies ( 1 January 2008)
Audio analyser goes offshore
User application article Offshore PCB assembler adopts the dScope Series III audio analyser following recommendation from UK client.
News from Prism Sound ( 1 January 2008)
Audio meter monitors surround sound
User application article The MSD600M++ stereo and surround sound meter is proving to be the solution for many of the world's top music recording and audio postproduction facilities.
News from DK-Technologies (31 December 2007)
Audio analyser brings manufacturer into line
User application article Briton EMS's decision to invest in a Prism Sound dScope Series III audio analyser was heavily influenced by Link Research.
News from Prism Sound (31 December 2007)
Audio analyser puts microphones to the test
User application article SoundField uses the dScope III audio analyser with the latest software release as part of its test and manufacturing procedures.
News from Prism Sound (28 December 2007)
Analyser proves popular for amplifier developers
User application article Marshall Amps is so delighted with the results it is achieving with dScope Series III that the company is considering introducing the unit to the production line.
News from Prism Sound (28 December 2007)
Testers cover analogue and digital infrastructure
User application article Prism Sound has now supplied five dScope Series III audio test, measurement and analysis systems to leading international communications company Cable and Wireless.
News from Prism Sound (28 December 2007)
No need to shout about audio loudness analyser
The MSD100C Loudness is designed to tackle the issue of the perceived loudness of audio signals.
News from DK-Technologies (28 December 2007)
Audio meters ensure postproduction consistency
User application article Welcome Post wanted to ensure that any audio leaving its facility would be properly balanced and adjusted to the highest peak level.
News from DK-Technologies (28 December 2007)
LabView driver controls digital generators
The combined technology of National Instruments and Berkeley Nucleonics allows users to build automated systems quickly and easily.
News from Berkeley Nucleonics (27 December 2007)
Earlier news from this category...
Latest news from this category...
