Adlink releases the entry-level Express-AT COM
An
Adlink Technology product story
Edited by the Electronicstalk editorial team
Oct 21, 2008
Adlink Technology has added the Express-AT to its Computer-on-Module (COM) range.
COM Express modules are integrated building blocks, based on PCI Express bus architecture, that plug into custom-made, application-specific carrier boards.
The Express-AT is an entry level COM Express module for systems that require a full set of graphics features.
The module comes with integrated support for high resolution CRT, single/dual channel LVDS and TV out (SDTV and HDTV).
In addition to the onboard integrated graphics, the chipset's SDVO bus can be used to connect to DVI, TMDS or additional LVDS device controllers by extension to a custom-designed carrier.
Applications include: medical diagnostics and medical imaging, gaming, industrial automation, test and measurement, video preprocessing and industrial control.
Express-AT's Intel Atom processor N270 features a thermal design power of just 2.5W at peak levels while supporting Intel Speedstep Technology.
Intel Atom processors share the same architecture as Intel Core2 Duo processors, despite being much smaller, and also support Hyper-Threading Technology, a feature that allows more than one code thread on a single core to be executed at once.
The Express-AT supports up to 2 GB of DDR2 667MHz memory on a single SODIMM socket.
The Mobile Intel 945GSE Express chipset integrates an Intel Graphics Media Accelerator 950 that provides CRT, single/dual channel LVDS and TV-out (SDTV and HDTV).
In addition to the onboard integrated graphics, the SDVO bus can connect to DVI, TMDS or TV-out device controllers.
The board also allows connection of up to three additional PCI Express x1 devices on the Intel I/O Controller Hub 7-M (ICH7-M) Southbridge.
The module comes with a single onboard Gbit Ethernet port and two SATA ports.
It has legacy support for a single Parallel IDE channel, 32-bit PCI and LPC.
The Express-AT comes equipped with an AMIBIOS8, supporting embedded features such as: remote console, CMOS backup, CPU and system monitoring and a dual watchdog timer for NMI or RESET.
It measures 125 x 95mm and is fully COM Express type 2 compatible.
Not what you're looking for? Search the site.
Contact Adlink Technology
Tel +886 2 8226 5877
Request information
Other Adlink Technology stories
-
Adlink to show products at Embedded World
Adlink Technology will exhibit its latest embedded computing platforms and systems at Embedded World 2009, at the Exhibition Centre in Nuremburg, Germany, from 3 to 5 March. -
Adlink extends COM range with ETX-AT
Adlink Technology has released the ETX-AT, the latest member of its Computer-on-Module (COM) range. -
Adlink offers frame grabber for machine vision
Adlink Technology has announced the PCIe-FIW64, its first 4-CH PCI Express IEEE1394.b frame grabber designed specifically for digital and high-speed computer-based machine vision applications. -
Adlink brings out the Nupro-935A SBC
Adlink Technology has released the Nupro-935A, a PICMG 1.0 single board computer (SBC) powered by the Intel Core2 Quad/Duo processor on 45 nm process. -
Adlink adds to computer-on-module range
Adlink Technology has released the latest member of its computer-on-module range, the Express-NR, a COM Express Type 2 module supporting the Intel Core2 Duo, Core Duo and Celeron M processors.
Categories
- Active Components (12,004)
- Passive Components (2,985)
- Design and Development (9,429)
- Enclosures and Panel Products (3,257)
- Interconnection (2,861)
- Electronics Manufacturing, Production, Packaging (3,073)
- Industry News (1,907)
- Optoelectronics (1,633)
- Power Supplies (2,320)
- Subassemblies (4,593)
- Test and Measurement (4,990)
