Product category:
AC/DC Power Supplies
News Release from: Alrad Instruments | Subject: SDS HV power products
Edited by the Electronicstalk Editorial
Team on 16 August 2006
HV power supplies set for Newbury outing
Alrad Instruments will be displaying a range of SDS HV power products on Stand 23 at the EMC UK 2006 exhibition at Newbury Racecourse on 17th and 18th October 2006.
Alrad Instruments will be displaying a range of SDS HV power products on Stand 23 at the EMC UK 2006 exhibition at Newbury Racecourse on 17th and 18th October 2006 As specialist in the design and manufacture of high-stability low-ripple regulated high-voltage units, SDS offers a wide range of solutions of high voltage power supplies from 500V to 80kV and maximum power up to 500W
This article was originally published on Electronicstalk on 8 Jul 2005 at 8.00am (UK)
Related stories
Current monitors clamp on for accuracy
Alrad Electronics has a new line of wideband clamp-on current monitors manufactured by Pearson Electronics, the highly respected US supplier of high precision current monitors.
An example of one of the products is the GIPO series high voltage pulse generator Q-switch, patented - under licence from the French Commissariat a l'Energie Atomique (CEA).
It is a one-edged, fast pulsed, power supply module for the control of beam steering, gating, driving grids and other capacitive (high impedance) loads enabling the fast commutation of an optical signal (2.5ns).
The stability of the high voltage power supply integrated in the module is very high (10ppm/C).
The pulse output connector (BNC) will drive various devices including: Pockels' cells and Q switches in laser systems, microchannel plates, photomultiplier tubes, control grids of power vacuum tubes, acoustic transducers etc.
• Alrad Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
