Product category:
Power Supply ICs and Controllers
News Release from: Analog Devices | Subject: ADM1185
Edited by the Electronicstalk Editorial
Team on 29 August 2006
Power sequencer smoothes basestation
supplies
Quad voltage monitor and sequencer is designed for systems with multiple power supplies that require sequencer products to ensure voltage rails are powered up in a controlled manner
Analog Devices has expanded its family of power supply sequencer and supervisory products with a flexible, accurate device that protects against brown out conditions in communications infrastructure equipment The ADM1185 quad voltage monitor and sequencer is designed for systems with multiple power supplies, like wireless basestations, that require sequencer products to ensure voltage rails are powered up in a controlled manner in order to prevent equipment damage
This article was originally published on Electronicstalk on 2 Jul 2008 at 8.00am (UK)
Related stories
A/D convertor measures smaller signals faster
Sigma-delta ADC achieves greater than true 16bit noise-free resolution up to 2.4kHz across all input voltages from 40mV to 5V.
SAR convertor claims record speed and accuracy
A/D convertor achieves a new level of 16bit data capture performance, with best-in-class 15bit ENOB and 10Msample/s throughput.
By providing both a voltage monitoring and sequencing function for up to four power supply rails, the ADM1185 actively controls the order in which the rails are powered up and monitors the system to ensure the rails are quickly powered down if a failure occurs.
The ADM1185 also features industry-leading precision threshold detection of 0.6V +/-0.8%, two times more accurate than competing devices, this enables accurate monitoring of supply voltages lower than 1.8V where a high accuracy power supply is needed.
The externally resistor programmable inputs enable a power supply designer to have any power up sequence simply by choosing which supply goes into which input.
Further reading
Front-end IC cleans up transmitter designs
The ADF9010 integrates a high-performance transmitter quadrature modulator with an integer-N synthesiser and on-chip low-phase-noise voltage-controlled oscillator.
Demodulator and amp cut receiver complexity
Combined two-chip solution can reduce the active component count by 60% within a radio design, providing considerable board area and bill of material savings.
User programmable time delays can be set using external capacitors.
The device is also housed in a 10-pin MSOP (mini small-outline plastic) package making it the industry's smallest quad sequencer.
"Analog Devices offers an innovative portfolio of sequencers with products capable of sequentially powering up from two to 10 supply rails", said Pat Meehan, Product Line Manager, Power System Management, Analog Devices.
"As a result, ADI can address all of our customers' power sequencing needs with products that simplify the monitoring, diagnosis and configuration of power supply rails in a variety of applications, including telecommunications infrastructure, data communications and storage".
The ADM1185 quad channel voltage monitor and sequencer is powered from 2.7 to 5.5V and is capable of monitoring up to four supplies at 0.8% accuracy.
In case of a voltage fault, an intelligent fault response feature shuts down the power good output flagging a system fault to the main system controller.
The system controller can then power down the supply rails in a pre-determined order to prevent system damage.
In the case of a power supply failure on the first Vcc all outputs are switched off.
In addition to the ADM1185, Analog Devices offers the ADM106x, ADM108x and ADM6819/20 voltage monitor and sequencer families, which support up to 10 power supply rails.
The ADM1185 is sampling now with full production scheduled for December 2006.
The devices are priced starting at $1.20 per unit in 1000-piece quantities and is specified over an operating temperature range of -40 to +85C.
• Analog Devices: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
