Product category:
DC/DC Convertors
News Release from: Powerstax | Subject: APC200
Edited by the Electronicstalk Editorial
Team on 12 April 2001
Triple-output DC/DC convertor packs 200W
Advanced Power Conversion has released a novel 200W full-brick-size DC/DC convertor with triple outputs.
Advanced Power Conversion has released a novel 200W full-brick-size DC/DC convertor with triple outputs This ground-breaking design offers one controlled and two semiregulated outputs in a high-density, low-profile industry-standard package of just 117 x 61.5 x 12.7mm
This article was originally published on Electronicstalk on 18 Oct 2000 at 8.00am (UK)
Related stories
Single/triple outputs - same size DC/DC convertors
Combining high reliability, increased flexibility and enhanced performance the APC200 DC/DC convertors' design allows single and triple outputs from the same full brick size (117x61x12.7mm) case
The APC200 is a high-efficiency (up to 85%) low-noise module with input voltage ranges of 18-72V DC.
Operating at a fixed 300kHz frequency which can be synchronised to an external clock for noise-sensitive applications, the patented APC topology works democratically without the need for master/slave operation, and can be connected in parallel by single wire for current sharing and true n+1 redundancy.
Additional features include overtemperature warning signal, remote on/off, current limiting, and short circuit protection.
The output voltage can be externally trimmed and the units meet input to output isolation of 3kV DC.
Conforming to IEC 950, UL1950, CSA950 and EN60950, the APC200 convertor gives greater flexibility and space-saving capability for an easier, quicker and more cost-effective solution for design of distributed power solutions.
• Powerstax: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
