Product category:
DC/DC Convertors
News Release from: Powerstax | Subject: APC-H031 series
Edited by the Electronicstalk Editorial
Team on 27 November 2001
Half-brick convertor protected for
telecomms
Advanced Power Conversion has added a new encapsulated half-brick module to its DC/DC convertor range.
Advanced Power Conversion has added a new encapsulated half-brick module to its DC/DC convertor range The APC-H031 series can deliver up to 30W of power with typical full load efficiency of up to an exceptional 87%
This article was originally published on Electronicstalk on 18 Oct 2000 at 8.00am (UK)
Related stories
Single/triple outputs - same size DC/DC convertors
Combining high reliability, increased flexibility and enhanced performance the APC200 DC/DC convertors' design allows single and triple outputs from the same full brick size (117x61x12.7mm) case
Outputs immediately available are 5.0, 3.3, 2.5, 1.7 and 1.5V and are fully isolated allowing versatile polarity configuration and grounding connections.
The low-profile industry-standard half-brick-size (61.0 x 57.9 x 12.7mm) metal-case convertor is designed for a wide input range of 36-75V, and standard operating temperature range of -40 to +110C.
Employing fixed-frequency operation of 250kHz the module has 1500V isolation and low output noise, making the unit ideal for telecomms application and other noise-sensitive applications.
A comprehensive range of control and protection features include voltage trim adjustable from 80 to 110% of nominal output, remote sense, overcurrent protection and output overvoltage clamp.
The remote on/off control option is available with either positive or negative logic.
APC-H031 convertors have a calculated MTBF of 3.5Mh and a short-pin version (2.79mm) is available for even greater space saving.
• Powerstax: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
