Product category:
Design and Development Hardware
News Release from: Arrow Electronics (UK) | Subject: MotionFire platform
Edited by the Electronicstalk Editorial
Team on 30 January 2008
Platform accelerates motor control
development
Arrow's MotionFire platform provides all of the hardware, software and documentation needed to rapidly and cost-effectively implement motion control systems.
Arrow has released an FPGA-based development platform that will dramatically speed the design, prototyping and testing of motor control applications Created by Arrow's European reference board team in conjunction with key suppliers and partners, the MotionFire platform provides all of the hardware, software and documentation needed to rapidly and cost-effectively implement motion control systems
This article was originally published on Electronicstalk on 29 May 2001 at 8.00am (UK)
Related stories
Development for voice and data DSL equipment
The latest reference platform kit from Arrow Electronics simplifies the design, evaluation, prototyping and debugging of DSL-based equipment for use in SOHO environments.
Single-chip control of PC Card interfaces
Arrow Electronics has a family of compact, highly integrated and power-efficient PC Card controllers that will help designers to lower component count, save space and reduce power consumption.
MotionFire comprises an FPGA and communication baseboard known as FireFighter, FireDriver motor driver power modules, state of the art motor control algorithms and communications IP.
The platform can be used to control any motor type or mix of motor types, making it suitable for motion control applications across a variety of automotive, industrial, medical, instrumentation and consumer electronics equipment.
The FireFighter baseboard features an Altera Cyclone-III low power 65nm FPGA and a variety of communication options including CAN ports, Ethernet interfaces, RS232 connectivity and 40 protected user I/Os.
Further reading
Eval board puts ColdFire in networking role
In a departure from traditional ColdFire evaluation platforms, the latest development kit adopts a systems solution focusing on the embedded networking properties of the MCF5272.
Development platform for web MCU applications
Arrow Electronics reckons its latest Microchip development platform will dramatically simplify the design and prototyping of embedded systems requiring Internet connectivity.
Power is provided by an integrated National Semiconductor power supply, while on-board memory comprises 256Mbyte of 200MHz DDR2, a 16Mbyte configuration memory and 16Mbyte of serial Flash memory for code storage.
Up to six galvanically isolated FireDriver power modules can be connected to the baseboard.
These generic four-phase drivers provide up to 10A per channel at a DC bus voltage of 50V DC and are available with protected and filtered encoded and/or Hall effect sensor inputs.
Back EMF sensing on three phases facilitates the implementation of sensorless drives, while synchronised ADC sampling is possible on all phases within the same PWM cycle.
Each FireDriver has its own on-board National Semiconductor power supply.
To support the hardware implementation, the MotionFire platform is supplied with key software and IP, including a full reference design based around Altera's versatile NIOS II configurable soft processor.
Advanced regulators are implemented in hardware with VHDL source provided as part of the platform, while features such as trajectory generator are implemented in software.
Engineers also have access to real-time Ethernet protocol IP.
All of the MotionFire hardware has been designed by Arrow's European reference board engineering team, with Altera and National Semiconductor sponsoring the digital and analogue aspects of the design respectively.
• Arrow Electronics (UK): contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
