Product category:
AC/DC Power Supplies
News Release from: Emerson Network Power - Embedded Power | Subject: TLP150 series
Edited by the Electronicstalk Editorial
Team on 03 February 2006
Front end PSUs complete distributed
architectures
A new series of compact 150W AC/DC power supplies are ideal for front-end conversion in systems with distributed power and point-of-load architectures.
Artesyn Technologies has introduced a new series of compact 150W AC/DC power supplies that are ideal front-end conversion solutions for systems with distributed power and point-of-load architectures The new TLP150 series power supplies provide a choice of 12, 24 or 48V outputs to simplify system integration, backed by extensive control and monitoring features to satisfy a wide variety of DC supply requirements
This article was originally published on Electronicstalk on 4 Feb 2000 at 8.00am (UK)
Related stories
70W AC/DC power supplies offer more flexibility
Artesyn's new 70 Watt AC/DC power supplies offer greater design flexibility
High efficiency DC/DC converters offer dual output
High-efficiency, open-frame, DC/DC converters provide two independent, fully regulated, positive outputs
For distributed power applications, the 12V model can be used to directly power boards fitted with multiple nonisolated point-of-load (POL) DC/DC convertors, and the 24 and 48V models are suitable for feeding onboard isolated brick or intermediate bus convertors.
The 24V model is also ideal for powering equipment with electromechanical loads such as relays, pumps and print-heads.
In addition to the main output channel, each power supply also provides a 12V output for powering fans, and an auxiliary always-on 5V DC output for applications that require standby operation is available as an option.
Further reading
Artesyn extands 24V DC/DC range to 30A
Artesyn Technologies has added a new member to its BXB family of industry standard, half-brick DC/DC converters.
New standard in efficiency from DC/DC Converters
Artesyn Technologies has introduced the EXB30 series of high-efficiency, single-output, open-frame, isolated DC/DC converters.
Artesyn releases 2000 Power Supply Handbook
Comprehensive catalogue features wide range of new AC/DC and DC/DC products.
All TLP150 series power supplies are Pb-free (RoHS 6/6) compliant.
The 12 and 24V models are also available with full medical approvals, for applications such as patient monitoring systems and other portable equipment used in medical wards and surgical operating theatres.
The medically approved versions have a very low safety earth leakage figure of 150uA, compared with 1mA for the industrial versions, and are equipped with fuses in both live and neutral inputs.
TLP150 series AC/DC power supplies employ an open-frame construction, combined with highly integrated layout and packaging techniques, to realise a small form factor, high functionality unit capable of delivering high levels of useable power.
Measuring just 127 x 76.2mm, with a profile of only 31.75mm, the supplies have a power density of more than 1.75Wcm3.
The main output channel can deliver up to 100W continuously under free air convection conditions, rising to 150W with just 60m/min forced air cooling.
The power supplies accommodate a wide ambient operating temperature range of 0 to +70C, maintaining full rated output up to 50C.
All TLP150 series power supplies feature a universal input that accepts any voltage in the range 85 to 264V AC at any frequency from 47 to 63Hz, enabling them to be used in equipment destined for any part of the world.
Active power factor correction minimises input harmonic current distortion and ensures compliance with the international EN61000-3-2 standard.
The power supplies employ the latest high frequency switch-mode technology to maximise conversion efficiency, typically achieving 81% at full load with a 115V AC input, and 84% with a 230V AC input.
Primarily intended as low- to medium-power front-end units for distributed power systems, the small physical size and high functionality of TLP150 series AC/DC power supplies makes them especially suitable for use in information technology equipment, light industrial systems and medical equipment.
Built-in control and monitoring features include AC and DC power good output signals and a remote on/off input, and the supplies are comprehensively protected against overcurrent, overvoltage and overtemperature conditions.
TLP150 series 12, 24 and 48V power supplies provide maximum main channel output currents of 12.5, 6.3 and 3.2A, respectively.
Active "democratic" current sharing, enabling multiple units to be connected in parallel for higher current applications, is available on select models.
These models also incorporate internal ORing diodes fitted to the main output, for fault-tolerant and N+1 redundancy applications.
The main output channel voltage of each supply can be adjusted 10% either side of nominal via an internal trim potentiometer, and regulation is maintained to within +/-3% for all line and load conditions.
Differential remote sense facilities are provided to compensate for up to 0.2V drop between the main channel output terminals and the load.
The auxiliary 5V DC output is regulated to within +/-5% and can deliver up to 1.0A; it is primarily intended for powering standby circuitry that needs to remain on for most of the time, such as power-up/down sequencers, and is unaffected by the on/off status of the main output channel.
The auxiliary 12V fan output can deliver up to 0.5A and is present whenever the main output channel is on.
All TLP150 series AC/DC power supplies comply with the rigorous EN55022-B and FCC part 15 Level B EMC standards for conducted noise and meet all applicable immunity standards, including EN61000-4-2, -3, -4, -5 and -6 levels 3.
The power supplies carry UL/cUL60950-1 and EN60950-1 VDE safety approvals, and the medical versions are also approved to UL/cUL2601-1 and VDE EN60601-1.
The standard industrial versions of the supplies have isolation ratings of 3kV AC input/output and 1.5kV AC input/chassis, whereas the medical versions have higher 4kV AC input/output ratings.
Conor Quinn, Product Manager for Artesyn Technologies, points out: "This is our second significant AC/DC standard product introduction in the last six months".
"It complements Artesyn's broad portfolio of DC/DC convertors and reaffirms our commitment to providing our customers with total solutions for all their power architecture needs".
Sample quantities of Artesyn's TLP150 series power supplies, including models with medical approvals, are available for immediate delivery.
Standard lead-time for both types is stock to 8-12 weeks and pricing starts at US $69 in quantities of 500.
• Emerson Network Power - Embedded Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
