No mercury required for tilt switch
An
Assemtech Europe product story
Edited by the Electronicstalk editorial team
Mar 11, 2003
The S1234 is a mercury free changeover tilt switch with hermetically sealed gold contacts, and a case size of just 7.6mm.
The S1234 is a mercury free changeover tilt switch with hermetically sealed gold contacts, and a case size of just 7.6mm.
Its rugged construction makes this switch suitable for many uses in security products, alarm and general movement sensing.
Maximum ratings are 60V AC and 0.2A for switching voltage and current, respectively.
Maximum contact resistance is 10ohm.
Not what you're looking for? Search the site.
Contact Assemtech Europe
Tel +44 1255 862236
Request information
Other Assemtech Europe stories
-
Dry reed relays offer mercury-free alternative
MDAS relays offer a high insulation resistance and have an internal electrostatic shield. -
Moulded changeover reed switch cuts costs
Moulded reed switch is ideal for harsh environments as the switch remains totally enclosed in its polypropylene shell. -
Solid state relay needs no power supply
A new type of solid state relay does not need to be activated or controlled by an external power supply. -
Vacuum reed switches handle high voltages
HBS Series high-voltage reed switches are vacuum devices with tungsten contacts, enabling them to switch high voltages or high inductive current loads. -
Reed switch is totally enclosed
Assemtech Europe reckons the PPS 150 is the lowest cost totally enclosed moulded reed switch available on the market today.
Categories
- Active Components (11,917)
- Passive Components (2,949)
- Design and Development (9,394)
- Enclosures and Panel Products (3,246)
- Interconnection (2,841)
- Electronics Manufacturing, Production, Packaging (3,055)
- Industry News (1,898)
- Optoelectronics (1,616)
- Power Supplies (2,297)
- Subassemblies (4,551)
- Test and Measurement (4,956)
