Product category:
Power Supply ICs and Controllers
News Release from: Atmel Corporation | Subject: ATA6264
Edited by the Electronicstalk Editorial
Team on 18 October 2006
Power chip assures automotive safety
Airbag system power supply IC is especially suited for high-end automotive applications.
Atmel Corp has announced the availability of a new monolithic ATA6264 airbag system power supply IC especially suited for high-end automotive airbag applications The new device, manufactured in high-voltage 0.8um BCD technology, provides a rich set of features not available from any other competing device
This article was originally published on Electronicstalk on 18 Nov 2005 at 8.00am (UK)
Related stories
Smart MCU aims for point-of-sale control
The AT91SAM9261 smart ARM microcontroller (SAM) is based on the ARM926EJ-S processor and is billed as the industry's first ultra-low-power deterministic microcontroller.
Controller maintains automotive system safety
With its built-in driver functions and complete monitoring system, the ATA6814 is a unique solution beneficial for all safety-relevant automotive electronics.
These features include measures against undervoltage conditions and battery cable loss, intelligent power sequencing, integrated watchdog and other diagnostic/monitoring functions.
In addition, the ATA6264 provides the highest accuracy as well as unrivalled flexibility due to its programmability.
The ATA6264 handles the voltage supply for complete airbag systems (which includes the sensors, microcontrollers, and firing devices) with programmable voltage levels.
Further reading
Tiny Flash MCUs promise frugal performance
Atmel Corporation has announced three new members of the AVR Flash microcontroller family, targeting battery chargers, sensor end-points and low-end motor control applications.
8bit microcontrollers make more of CAN systems
Two new 8bit AVR Flash microcontrollers feature extended Controller Area Network capabilities.
Flash microcontroller meets USB specs
Atmel has been granted certification by the USB Implementers Forum (USB-IF) for its AT91SAM7S64 ARM-based 32bit Flash microcontroller.
Communication with the microcontroller is carried out via a 16bit SPI, and two ISO9141 interfaces enable the communication with diagnostic testers; one of these interfaces can be customer-programmed as a LIN interface.
The voltage supply section of the ATA6264 consists of a boost convertor with adjustable voltage, two buck convertors and a linear regulator that can be customer-programmed.
This flexibility allows the user to adapt the ATA6264 to the needs of different system requirements and thus simplifies stocking issues.
The output voltage of the boost convertor is defined by an SPI command, and an external voltage divider, and can be adjusted from 15 to 40V.
The high supply voltage charges the capacitors to feed the system in the event of an undervoltage condition, such as a disconnected battery.
An integrated one-time-programmable memory (OTP), which is used to program the ISO interface, allows the user to program the output voltages of the buck convertors (7.8 to 10.4V, 1.88 to 5.0V) and the highly-accurate linear regulator (3.3 and 5.0V) during the production process (end-of-line programming by an in-circuit tester).
If the linear regulator's 100mA current capability is not sufficient, the user can extend it using an external bypass transistor.
The ATA6264 supports dual microcontroller systems with intelligent power sequencing, preventing the buck convertors' output voltages from exceeding a predefined limit and reliably defining which one of the microcontrollers is activated first.
As a unique feature, if the airbag power supply IC detects an undervoltage condition and the loss of the supply voltage (for example, a battery cable disconnect during a crash), then it automatically draws its energy from a backup capacitor connected to the boost convertor.
The diagnosis and monitoring section of the ATA6264 adds safety to the system and helps minimise the number of system components.
Five integrated voltage sources for resistor measurements - especially suited for monitoring the buckle switches of an airbag system - are available.
Temperature diodes embedded in both buck convertors and the linear regulator measure the chip temperature.
In the case of an access temperature condition, a status bit is set and the microcontroller can react.
The safety philosophy is further expanded by an integrated watchdog timer and reset circuitry.
In the event of a microcontroller failure or improper voltages, the ATA6264 sends a reset command.
The device meets strict automotive qualification demands; it is protected against conducted interferences according to ISO/TR7637/1 EMC and ESD protection.
Samples are available now in RoHS-compatible QFP44 packages with pricing starting at US $3.30 for 10,000-piece quantities.
• Atmel Corporation: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
