Visit the Linear Technology Corp web site
Click on the advert above to visit the company web site

Product category: Power Supply ICs and Controllers
News Release from: BI Technologies Electronic Components Division | Subject: PFC modules
Edited by the Electronicstalk Editorial Team on 17 November 2005

Hybrid modules simplify power factor
correction

Request your FREE weekly copy of the Electronicstalk email newsletter. News about Power Supply ICs and Controllers and more every issue. Click here for details.

A series of low-profile compact PFC modules range from 500 to 3000W.

Providing power electronics design engineers with a convenient means of adding boost-type power factor correction to their switching power supplies, TT Electronics BI Technologies offers a series of low-profile compact PFC modules that range from 500 to 3000W In addition, the company has recently developed a ready-to-run evaluation board/design tool capable of testing the modules

"The Model 7720 Series are the most compact power factor correction modules available, and they contain all power components necessary to implement power factor correction for a switching power supply", said Mike Ochoa-Hougan, Hybrid Microcircuits Product Manager for BI Technologies Electronic Components Division.

"The single module approach allows design engineers to eliminate many thermal and mechanical mounting issues, as well as the difficulty of selecting the proper FET and diode combinations for an effective, efficient and compact design".

The addition of power factor correction circuitry enables switching power supplies with ratings higher than 75W to make optimum use of the available AC line current while allowing the unit to meet harmonic requirements.

It is mandatory in Europe, and is rapidly being accepted in North America.

The 7720 Series module replaces up to ten TO-220 or TO-247 discrete power semiconductors required to achieve power factor correction in a conventional power supply design, Ochoa-Hougan continued.

The power modules are available in three standard configurations: the Model 7720-1A for power supplies from 1500 to 3000W (600V/25A rectifier; 500V/0.1ohm MOSFET); the Model 7720-2A for power supplies from 1000 to 2250W (600V/25A rectifier; 500V/0.3ohm MOSFET); and the Model 7720-3A for power supplies from 500 to 1500W (600V/18A rectifier; 500V/0.2ohm MOSFET).

Operating temperature range for all the Model 7720 Series is -40 to +125C, and the devices have a footprint of 35 x 56.6mm, with a board mounted profile of just 5.1mm.

The PFC evaluation board offered by the company contains all of the necessary control and power circuitry, along with the required inductor assembled onto a compact board.

With correction to near unity power factor and better than 95% efficiency, the board can easily be used to evaluate a wide variety of applications, including switching power supplies from 500W to 3000W, motor drives, servo amplifiers, solenoid drivers, solid state relays and three-phase rectifier bridges.

The ready-to-run evaluation board accepts 85 to 265V RMS input voltage at 50-60Hz, and is capable of handling up to 3kW of power with a proper cooled heatsink.

Pricing for the PFC evaluation board is $199, and pricing for the modules begins at less than $20 in volume.

Lead time is from stock to 12 weeks.

BI Technologies Electronic Components Division: contact details and other news
Email this article to a colleague
Register for the free Electronicstalk email newsletter
Electronicstalk Home Page

Search the Pro-Talk network of sites

Visit the Linear Technology Corp web site