Product category:
Stand-Alone Instruments
News Release from: TTi (Thurlby Thandar Instruments) | Subject: PM300
Edited by the Electronicstalk Editorial
Team on 25 March 2004
Power analyser works unaided up to 20A
The PM300 power analyser is ideal for general-purpose measurements of watts, power factor, harmonics and voltage in the design, development and production of electrical and electronic equipment.
The PM300 power analyser is ideal for general-purpose measurements of watts, power factor, harmonics and voltage in the design, development and production of electrical and electronic equipment With direct connection to the analyser's 20A rated internal shunts, the errors of gain and phase found in external current transformers and transducers are eliminated
This article was originally published on Electronicstalk on 12 May 2000 at 8.00am (UK)
Related stories
Compact bench power supply provides 175W
The EX355, new from TTi (Thurlby Thandar Instruments), is a single-output laboratory DC power supply providing an output from 0 to 35V at 0 to 5A.
Programmable power-supplies offer outputs to 1kW
The XHR range of programmable power supplies, offering output ratings up to 1 kW is power-factor corrected for low current draw and reduced generation of input current harmonics.
For measurements above 20A, a broad range of transformers, shunts and DC coupled transducers can be accommodated.
Voltage input range is from 2V RMS to 1000V peak, and current input range is from 20mA RMS to 20A RMS.
The basic accuracy is 0.1%, with a bandwidth from DC to 250kHz.
Overload withstand is 1400V peak for 1s or 60A RMS for 1s.
The front panel gives a graphic display of waveforms and harmonic barcharts.
Watts, volts, amperes, volt-amperes, reactive power, power factor, peak voltage, peak current, crest factor and frequency may also be displayed.
Optional interfaces include an IEEE488 unit for high-speed control and data capture.
RS232 and parallel printer interfaces allow complete command and results handling as well as connection to a standard printer for printing displayed or selected numeric results.
A chart-recorder and alarm interface is also included with 12 DC outputs of 0-5V to track any measurement parameter desired.
Two free relay contacts can be programmed to toggle at any selected level for alarm or process control purposes.
The 12 chart recorder outputs may also be configured as digital alarms.
VPASLite Windows software is available for control and data handling.
This features quick and easy setup of parameters to analyse and display numeric data and harmonic barcharts.
Data may be exported to standard Windows-based text and spreadsheet applications for further presentation and analysis.
The PM300 costs GBP 2237 (plus VAT).
• TTi (Thurlby Thandar Instruments): contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
