Product category:
Board-Level Instruments
News Release from: TTi (Thurlby Thandar Instruments) | Subject: Gage CompuScope 14200
Edited by the Electronicstalk Editorial
Team on 28 January 2005
Digitiser card runs from the lab to ATE
A new general-purpose digitiser card aims to satisfy precision signal-capture requirements in scientific and commercial research and development as well as manufacturing test applications.
Now available exclusively in the UK from TTi (Thurlby Thandar Instruments), the Gage CompuScope 14200 is a general-purpose digitiser card aimed at satisfying precision signal-capture requirements in scientific and commercial research and development as well as manufacturing test applications Designed for use with the PCI platform, the CompuScope 14200 operates at 200Msample/s with 5ns sampling intervals and a resolution of 14bit
This article was originally published on Electronicstalk on 12 May 2000 at 8.00am (UK)
Related stories
Compact bench power supply provides 175W
The EX355, new from TTi (Thurlby Thandar Instruments), is a single-output laboratory DC power supply providing an output from 0 to 35V at 0 to 5A.
Programmable power-supplies offer outputs to 1kW
The XHR range of programmable power supplies, offering output ratings up to 1 kW is power-factor corrected for low current draw and reduced generation of input current harmonics.
The front-end of the digitiser card is fully software-controlled, providing two input channels via BNC connectors with a wide range of coupling, impedances, and input ranges.
A full assortment of clock and trigger input and output signals, accessed via SMA connectors, make the CompuScope 14200 extremely easy to integrate into a test system.
The 14bit nominal resolution is backed up by a +/-0.5% accuracy and a very flat bandwidth of 100MHz (through a 50ohm impedance).
The card is equipped with 32Msample of memory as standard, making 16Msample available to each of the two channels.
The CS14200 can also be equipped with up to 1Gsample of total onboard memory, and can use 32bit, 66MHz PCI standards to transfer data at 200Mbit/s.
Other features include time stamping, digital inputs and gated capture.
To aid the integration of the Gage acquisition cards into a functional system, the Gage CS14200 is supported by application development kits (ADKs) for C/C++, Matlab and LabView for custom programming.
• TTi (Thurlby Thandar Instruments): contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
