Product category:
Stand-Alone Instruments
News Release from: TTi (Thurlby Thandar Instruments) | Subject: Fluke 430 Series
Edited by the Electronicstalk Editorial
Team on 19 October 2006
Analysers test to latest power quality
specs
The Fluke 430 Series of three-phase power quality analysers help to locate, predict, prevent and troubleshoot problems in power distribution systems quickly and safely.
The Fluke 430 Series of three-phase power quality analysers, now available from TTi (Thurlby Thandar Instruments), help to locate, predict, prevent and troubleshoot problems in power distribution systems quickly and safely Featuring full IEC61000-4-30 Class compliance, expanded memory and measurement capability, plus a user-configurable logging function, these easy-to-use handheld tools have many innovative features, including the ability to show power waveforms in great detail with on-screen display of trends and captured events, even while background recording continues
This article was originally published on Electronicstalk on 12 May 2000 at 8.00am (UK)
Related stories
Compact bench power supply provides 175W
The EX355, new from TTi (Thurlby Thandar Instruments), is a single-output laboratory DC power supply providing an output from 0 to 35V at 0 to 5A.
Programmable power-supplies offer outputs to 1kW
The XHR range of programmable power supplies, offering output ratings up to 1 kW is power-factor corrected for low current draw and reduced generation of input current harmonics.
The latest model in the family is the Fluke 435, which features 0.1% voltage accuracy and a GPS time synchronisation option, making it fully compliant with the IEC61000-4-30 Class A standard.
The instrument also has double the memory capacity of earlier models, as well as a user-configurable logging function which allows it to be set up easily for any test condition with memory for up to 100 parameters on all four phases (a total of 400) at user-defined intervals.
Users can easily view logged data and generate reports with the new Fluke Power Log software included with the unit.
Further reading
Low-pass filter meets digital testing requirements
The new Audio Precision S2-AES17LP filter, now available exclusively in the UK from TTi, meets the requirements for digital audio testing laid down by the Audio Engineering Society.
Programmable synthesised 1GHz RF generator
The TGR1040GP from TTi (Thurlby Thandar Instruments) is a programmable synthesised RF signal generator with a frequency range up to 1GHz.
The Fluke 435 also features mains signalling capability that enables users to measure interference from ripple control signals at specific frequencies.
It includes four flexible 3000A current probes that are 600V CAT IV-rated and instrument-powered, eliminating the need for batteries.
The Fluke 435 is supplied complete with a new rugged transit case.
The 430 Series analysers incorporate the new IEC standards for flicker, harmonics and power quality for convenient troubleshooting of both three- and single-phase power distribution systems.
Users can analyse trends in real time using the cursors and zoom tools while background recording continues.
The series now includes expanded wiring configurations with 2 and 2.5 element measurement modes, improved 0.001Hz resolution, and support for GPS time synchronisation according to IEC610000-4-30 with the optional GPS430 module The enhanced 430 Series analysers also feature improved phase-angle resolution of 0.1 degrees that is referenced to L1/A voltage, and a phase rotation indicator that enables users to determine correct connections by providing clear indication of the phase rotation direction.
The Fluke analysers have a safety rating of 600V CAT IV and 1000V CAT III.
The new Fluke 430 series is supplied with FlukeView analysis and PowerLog software, to enable the recorded information to be backed up, and displayed on a PC.
• TTi (Thurlby Thandar Instruments): contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page

