Product category:
Stand-Alone Instruments
News Release from: TTi (Thurlby Thandar Instruments) | Subject: QPX1200
Edited by the Electronicstalk Editorial
Team on 17 May 2007
Power supply stands the test of
flexibility
Laboratory DC power supply covers voltage and current combinations between 60V/20A and 20V/50A, making it suitable for a very wide range of applications.
The new QPX1200 laboratory DC power supply from TTi (Thurlby Thandar Instruments) is a 1.2kW unit featuring PowerFlex regulation This enables it to offer voltage and current combinations between 60V/20A and 20V/50A, making it suitable for a very wide range of applications
This article was originally published on Electronicstalk on 12 May 2000 at 8.00am (UK)
Related stories
Compact bench power supply provides 175W
The EX355, new from TTi (Thurlby Thandar Instruments), is a single-output laboratory DC power supply providing an output from 0 to 35V at 0 to 5A.
The QPX1200 includes a linear output stage within its PowerFlex regulator.
This gives it a very low output noise of less than 3mV RMS, and a transient recovery time typically ten times better than that of conventional switch-mode units.
The unit is fully digitally controlled using instrumentation quality 16bit digital-analogue convertors.
Local setting is by either numeric keypad or spin wheel, and remote-control analogue, RS232 and USB interfaces are included as standard.
Unlike most higher-power laboratory PSUs, the QPX1200 is equally suited to bench or rack-mount applications.
Output and sense terminals are provided on both the front and rear panels.
The case has integral tilt feet, and a 3U rack mount is available as an option.
The QPX1200 costs GBP 995 (plus VAT) in the UK.
• TTi (Thurlby Thandar Instruments): contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
