Product category:
Stand-Alone Instruments
News Release from: TTi (Thurlby Thandar Instruments) | Subject: PL Series
Edited by the Electronicstalk Editorial
Team on 27 September 2007
Lab supplies blend digital and analogue
benefits
TTi has designed a hybrid system combining true analogue control knobs with digital internal circuitry.
The PL Series of laboratory DC power supplies from Thurlby Thandar Instruments offers the benefits of digital technology but retains true analogue controls for voltage and current The new product range replaces the original PL series, which has become the most widely used power supply range within the UK electronics industry
This article was originally published on Electronicstalk on 12 May 2000 at 8.00am (UK)
Related stories
Compact bench power supply provides 175W
The EX355, new from TTi (Thurlby Thandar Instruments), is a single-output laboratory DC power supply providing an output from 0 to 35V at 0 to 5A.
Programmable power-supplies offer outputs to 1kW
The XHR range of programmable power supplies, offering output ratings up to 1 kW is power-factor corrected for low current draw and reduced generation of input current harmonics.
In designing the new PL Series, TTi wanted to incorporate the stability benefits associated with digital control.
However, the company was also anxious to ensure that the product would meet customer needs and expectations.
To ensure this, the company embarked on a series of interviews with customers aimed at discovering their preferences, particularly over front-panel controls.
Further reading
Low-pass filter meets digital testing requirements
The new Audio Precision S2-AES17LP filter, now available exclusively in the UK from TTi, meets the requirements for digital audio testing laid down by the Audio Engineering Society.
Programmable synthesised 1GHz RF generator
The TGR1040GP from TTi (Thurlby Thandar Instruments) is a programmable synthesised RF signal generator with a frequency range up to 1GHz.
LCR bridge sets new price-performance standard
The LCR400, new from TTi (Thurlby Thandar Instruments), is a precision LCR bridge with a built-in 4-terminal test fixture and a full limits comparator for component sorting.
It quickly became clear that, whereas users understood the benefits of digital control, many saw it as unnecessarily complicated for adjusting the basic parameters of voltage and current.
Traditional analogue controls were seen as simpler, quicker, and better fitted for the job.
To solve this dilemma, TTi designed a hybrid system combining true analogue control knobs with digital internal circuitry.
For the user, the new PL Series operates identically to a traditional analogue controlled power supply.
However, if the user wants the benefits of digital control, they are instantly available via the S-lock and V-span functions.
The S-lock function enables the voltage and current settings to be locked at the press of a button.
This transfers control of voltage and current from the analogue controls to internal digital circuitry.
This offers not just complete security, but exceptional stability as well, with each setting controlled by a high-resolution instrumentation quality digital-analogue convertor.
The V-span function allows the user to redefine the end-stop values of the voltage control to create a specific voltage range.
When working with any particular piece of equipment, engineers often require a voltage source variable over only a narrow range.
V-Span enables the whole 300-degree rotation of the voltage control to cover whatever voltage range the user requires.
The new PL Series uses linear regulation to provide an extremely low RMS noise figure of below 0.4mV with tightly specified peak-to-peak noise and common-mode current figures as well.
Despite improvements in high-frequency switcher design, linear regulation still offers the lowest output noise, the best transient response and the most benign stability characteristics when driving complex load conditions.
The new PL series achieves an exceptional power density for a linear regulated power supply by offering up to 90W from a case just 107mm wide (quarter-rack 3U).
This gives it an unusually small bench footprint for taking up less space on a crowded bench.
For rack-mount application, up to four units can be mounted into a single 3U slot.
Despite its small sise and linear regulation, the new PL series generates relatively little heat through the use of an advanced phase-controlled pre-regulator.
This gives it significantly higher energy efficiency than conventional linear regulated designs, particularly when supplying lower voltages.
The first models to be launched are three single-output power supplies of 15V/5A, 30V/3A and 60V/1.5A, each costing GBP 260 (plus VAT).
• TTi (Thurlby Thandar Instruments): contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
