Product category:
AC/DC Power Supplies
News Release from: BTCPower | Subject: RPS2400
Edited by the Electronicstalk Editorial
Team on 12 December 2001
1U-high shelf crams in up to 2.1kW of
smooth DC
The RPS2400 front-end rectifier power shelf from Broadband TelCom Power (BTCPower) provides up to 2100W in a low-profile, 1U high rack-mount chassis.
The RPS2400 front-end rectifier power shelf from Broadband TelCom Power (BTCPower) provides up to 2100W in a low-profile, 1U high rack-mount chassis The unit converts universal AC mains input voltage to isolated, regulated 48V DC for use in distributed power systems
This article was originally published on Electronicstalk on 21 Nov 2001 at 8.00am (UK)
Related stories
Flat transformers boost convertor power density
Broadband TelCom Power (BTCPower) has used patented flat transformer technology to redefine performance of the industry-standard quarter-brick (58 x 37 x 11mm) DC/DC convertor.
The RPS2400 shelf is an industry standard 1U high rack mount chassis that accepts up to three RPM800 power modules, giving a maximum power capacity of 2100W of 48V DC regulated power.
Each RPM800 has its own AC input power cord while the common output power is brought into a single 48V output bus by the RPS2400 for easy system wiring.
A signal connector provides over temperature warning and power system status.
Multiple RPS2400 shelves can be interconnected to achieve even higher power capability.
For example, two RPS2400 shelves, with a total of six RPM800 modules can be used to form an N+1 array capable of providing 3.5kW with a 700W redundant module, ready in the even of any single module failure.
Each module has hot-swap and active load sharing capability.
The RPS2400 conforms to EN61000 (Power Factor), EN55022 class A (conducted) and is UL, CSA, TUV and CE certified.
• BTCPower: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
