Product category:
PCB Assembly Equipment and Tools
News Release from: Blundell Production Equipment | Subject: BTS 2530 and BTS 4530
Edited by the Electronicstalk Editorial
Team on 11 January 2005
PCB cleaners remove stubborn stains
The BTS 2530 and BTS 4530 four stage printed circuit board cleaning machines operate with water soluble cleaning agents to remove flux residues from PCBs after soldering.
The BTS 2530 and BTS 4530 four stage printed circuit board cleaning machines from Blundell Production Equipment operate with water soluble cleaning agents to remove flux residues from PCBs after soldering The heated wash tank uses timed ultrasonics at safe frequencies of 25 or 40kHz to remove the most stubborn of stains from PCB surfaces
This article was originally published on Electronicstalk on 13 Apr 2004 at 8.00am (UK)
Related stories
Benchtop cleaner applies ultrasonics to PCBs
The TTC 2530 is a bench-mounted four-stage ultrasonic cleaning machine for printed circuit boards or electronic assemblies.
The washing stage is followed by a rinse in mains water and then a further rinse using deionised water.
Boards are then dried in a hot air drying chamber.
All parts of the cleaner that come into contact with water or cleaning solution are made from stainless steel.
The process is PLC controlled with each stage being programmable for time and temperature.
The cleaning machine has built in overtemperature protection, and a touch screen control module.
The smaller model will clean PCBs up to 250 x 300mm, and there is a larger cleaner available with a tank size of 450 x 300mm.
• Blundell Production Equipment: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
