Product category:
Handheld and Other Small Enclosures
News Release from: Camden Electronics | Subject: CNMB/12
Edited by the Electronicstalk Editorial
Team on 18 February 2008
DIN rail enclosure comes with 30% extra
capacity
Additional length allows users to include larger electronic printed circuits in a single enclosure.
Camden Electronics has added a new size 12 enclosure to its versatile modular DIN rail mounting range offering 30% extra capacity A logical addition to the range, the new CNMB/12 snap-fit DIN-rail enclosure is 210mm long compared with 160mm for the CNMB/9
This article was originally published on Electronicstalk on 5 May 2000 at 8.00am (UK)
Related stories
Fused terminal blocks with UL approval
Two new fused terminal blocks have been introduced by Camden Electronics.
UL-approved fused terminal blocks
Two new fused terminal blocks have been introduced by Camden Electronics.
It is supplied complete with 12 terminal guards as standard, eight perforated on 5.08mm pitch and four solid.
The additional length allows users to include larger electronic printed circuits in a single enclosure.
A vented option is also available for applications requiring additional heat dissipation.
Further reading
Sealed lead-acid batteries are UL approved
Camden Electronics has introduced its upgraded and enhanced Eleckson range of sealed lead acid batteries, the UL-approved Europa Plus family.
Terminal blocks offer greater strength
Camden Electronics has launched new 7.5 and 7.62mm pitch standard profile rising clamp terminal blocks that offer increased strength.
Camden's acclaimed CNMB series enables users to produce housings to meet almost any conceivable requirement.
With the addition of the CNMB/12, a total of eight versions is currently available offering lengths of 17.5, 36, 53, 71, 88, 106, 160 and 210mm, all 90mm wide.
Offering greater versatility, Camden's design features PCB guides to ensure boards are held in place firmly and moulded screw holes in the base to facilitate mounting of PCBs with heavier components such as relays or transformers.
Up to three PCBs can be mounted horizontally while there are four mounting positions for vertical boards.
In addition, the enclosure base is fully sealed with none of the holes that are found on competing products, avoiding the need for any insulating pads and reducing assembly costs for users.
The design of the enclosure is such that all tabs on the body have been eliminated to avoid small lugs that might break off.
Standard colour is grey (RAL7035), although Camden can also supply mouldings in black, green, red or blue for volume orders.
In addition, ventilation slots and other features can be incorporated in the tooling for volume customers who wish to avoid the need for machining.
Besides reducing costs for the end user this facility also results in a stronger moulding compared with a similar enclosure with machined ventilation slots.
Additional special features include snap-on terminal covers to IP20 finger protection with perforated screwdriver and wire entry holes and tabs as standard and spring-loaded DIN-rail clips that can be snapped open to allow chassis/surface mounting.
Camden can also supply an optional adapter for G-rail mounting.
Terminal covers and snap-in panels can also be provided to customer specifications for volume orders.
Other optional special features include EMI-shielded metallic coated boxes.
• Camden Electronics: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
