Fractional charge pump boosts LED drive efficiency
The CAT3637 is optimised for applications with one bank of five or six identical LED channels, a typical configuration for larger LED screen portable products.
Catalyst Semiconductor has expanded its line of patented Quad-Mode fractional charge pump LED drivers with a new device optimised for portable products.
The new CAT3637 addresses the requirements for high-efficiency and easy LED programming in these products, with 10% higher efficiency (compared with three-mode charge pumps) and a simple, 1-wire EZDim interface control.
The CAT3637 is optimised for applications with one bank of five or six identical LED channels, a typical configuration for larger LED screen portable products.
The device incorporates a simplified version of Catalyst's already easy-to-use, 1-wire EZDim interface, which supports 16 output power levels, from zero to 30mA full brightness 2mA resolution steps.
With efficiency levels as high as 92%, no added capacitors required, and a tiny 3 x 3mm, low-profile TQFN package, the Quad-Mode CAT3637 saves significant board space and costs in next-generation portable products.
According to Scott Brown, Vice President of Marketing for Catalyst Semiconductor: "When it comes to LED-based products, we are seeing a wide variety of design approaches throughout the market, depending on the customer and application".
"The CAT3637 is the fifth device in Catalyst's Quad-Mode product line and exemplifies our strategy to be a "one-stop" vendor for a broad range of LED drivers which address this diversity of customer requirements".
The CAT3637 joins the following devices in Catalyst's Quad-Mode family of LED drivers: the CAT3604V four-channel LED driver with PWM dimming interface; and the CAT3636 six-channel, CAT3644 four-channel and CAT3643 three-channel devices with 1-wire EZDim interface.
The CAT3637 LED driver is priced at US $0.82 each in 10,000 piece quantities.
Samples and evaluation boards are also available.
Projected lead-time for production quantities is currently 6 to 8 weeks ARO.
Not what you're looking for? Search the site.
Categories
- Active Components (11,500)
- Passive Components (3,116)
- Design and Development (9,448)
- Enclosures and Panel Products (3,339)
- Interconnection (2,989)
- Electronics Manufacturing, Production, Packaging (3,162)
- Industry News (1,927)
- Optoelectronics (1,687)
- Power Supplies (2,414)
- Subassemblies (4,783)
- Test and Measurement (5,122)
