Product category:
VMEbus Boards and Assemblies
News Release from: Concurrent Technologies | Subject: VP CP1/Pxx
Edited by the Electronicstalk Editorial
Team on 13 July 2001
Top-spec VME CPU board with up to 1Gbyte
DRAM
New from Concurrent Technologies, the VP CP1/Pxx is a high-performance single-slot 6U VME CPU board featuring a choice of 850 or 700MHz Pentium III CPU with up to 1Gbyte onboard DRAM.
New from Concurrent Technologies, the VP CP1/Pxx is a high-performance single-slot 6U VME CPU board featuring a choice of 850 or 700MHz Pentium III CPU with up to 1Gbyte onboard DRAM The board's Pentium III processor has 32Kbyte of Level 1 cache and a 256Kbyte Level 2 cache
This article was originally published on Electronicstalk on 27 Nov 2001 at 8.00am (UK)
Related stories
Single-slot VME board boasts 1GHz CPU and 1Gbyte
Concurrent Technologies has added a 1GHz Pentium III CPU option for the VP CP1/Pxx single-slot 6U VME family.
6U CompactPCI Board features Flip-Chip Pentium III
Concurrent Technologies has announced the release of the PP EMB/P34 Peripheral Slot Controller CPU board, a single slot 6U CompactPCI Board featuring the Flip-Chip Pentium III processor.
Hot-Swap PMC Carrier allows continuous operation
The PP PMC/002 is designed to provide a cost effective and flexible approach to implementing standard and custom I/O requirements using industry standard PMC modules in CompactPCI systems.
It uses the long life cycle 82440BX chipset which supports the 100MHz front side bus.
A customised heatsink is fitted to the CPU to ensure that no fan is used on the board, and the board design is contained within a single slot.
Up to 1Gbyte of DRAM can be installed onboard, using a combination of SO-DIMMs and modules, while still maintaining a single-slot solution.
This memory is accessible from the Pentium III, PCI bus, and the VMEbus.
Additional features of the VP CP1/Pxx include support for 10/100Mbps Ethernet interface via a front panel RJ45 connector, EIDE interface, AGP graphics with flat panel display support, two RS232 serial interfaces, and PC features including keyboard, mouse, real-time clock, floppy disk interface, parallel interface, two USB interfaces, and a watchdog timer.
Hardware byte swapping and bus error detection are also included on the board.
The board's features can be further extended by the onboard PMC site and the addition of an optional PMC carrier board (AD CR2/PMC).
By providing the user with up to three PMC sites within two slots, the board can be customised, using standard or specialised PMC modules, to match the application's requirements.
In addition, the board can support CompactFlash and DiskonChip.
"This board has been designed in response to our customers' requirements for both high performance and a large amount of onboard memory", commented Jane Annear, Director of Sales at Concurrent Technologies.
"Its wide range of features, and the support for PMC will make it suitable for a variety of applications and markets".
The VP CP1/Pxx supports industry-standard operating systems including Windows NT, VxWorks, Solaris, Linux and QNX.
• Concurrent Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
