Product category:
Gaskets, Seals and Screens
News Release from: Chomerics Europe | Subject: Clip-Shield
Edited by the Electronicstalk Editorial
Team on 21 May 2001
Clip-on gasket shields and seals
The new Clip-Shield range of clip-on EMI shielding gaskets from Chomerics are designed for enclosure applications requiring both high levels of EMI shielding and resistance to outdoor environments.
The new Clip-Shield range of clip-on EMI shielding gaskets from Chomerics have been designed for enclosure applications requiring both high levels of EMI shielding and resistance to outdoor environments Providing a secure mechanical attachment to enclosure doors or panels, Clip-Shield consists of a Chomerics CHO-SEAL conductive elastomer, bonded to a flexible PVC/TPE-coated aluminium clip
This article was originally published on Electronicstalk on 22 Mar 2001 at 8.00am (UK)
Related stories
Tape sticks sinks without fasteners
The latest thermally conductive adhesive tape from Chomerics can significantly simplify PCB assembly by eliminating thermal grease and mechanical fasteners.
A choice of several CHO-SEAL materials is available, all of which can be co-extruded with a non-conductive silicone for optimum environmental protection.
The shielding effectiveness of Clip-Shield ranges from 55 to 120dB over the frequency range 200MHz to 10GHz, depending on the CHO-SEAL material specified.
Designed for easy manual installation, Clip-Shield can be attached to curved mounting surfaces with a corner radius down to 51mm, and it is also available with 90-degree spliced corners if required.
Clips can be specified in different sizes to accommodate panel thicknesses from 1.52 to 12.7mm, and conductive elastomer extrusion widths are available up to 19.05mm.
• Chomerics Europe: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
