Product category:
PCB Assembly Equipment and Tools
News Release from: Contax | Subject: Camalot Xyflex
Edited by the Electronicstalk Editorial
Team on 17 June 2004
Dispenser is spot on to increase
throughput
Stoneridge Pollak has turned to Hampshire-based Contax to increase production efficiency.
Stoneridge Pollak, part the Stoneridge Group, a world leading designer and manufacturer of highly engineered electrical and electronic components for the automotive and related markets, has turned to Hampshire-based Contax, the leading independent supplier of automated production machines, to increase production efficiency With a Group turnover in excess of GBP 630 million, Stoneridge Pollak is a Tier One supplier to the automotive industry, with clients such as General Motors, Ford Motor Company, Deere and Company and Navistar International Corporation
This article was originally published on Electronicstalk on 27 Feb 2007 at 8.00am (UK)
Related stories
Dispenser is precise about lead-free paste
The XyflexPro+ features advanced technology that delivers an increased speed rating that is over 30% higher than other dispensing systems, and claims twice the accuracy.
Overmoulding protects cables and assemblies
The Werner Wirth overmoulding machine operates with both cable preparation and PCB assembly equipment, moulding strain reliefs, connector shells and grommets onto electrical cables.
It had been awarded a contract to produce the electronic components for automotive hazard warning switches to be installed in General Motors' range of cars.
These components comprise a metal plate surrounded by a plastic moulding.
The plastic casing has ensured that the components could not be screen printed onto the plate, and so another method had to be used.
Further reading
Automatic crimper handles ultrafine wires
The Komax Gamma 255 is a fully automatic crimping machine for top-quality processing of ultrafine wires.
Crimper suits flexible production schedules
The Komax Zeta 633 fully automatic crimping machine is ideal for the just-in-time production of individual conductors and offers a virtually limitless number of possible processes.
Oven is ideal for lead-free processing
The Essemtec RO300FC is a new full convection reflow oven for high-temperature soldering of sensitive electronics, and is an ideal solution for lead free soldering.
Explained the spokesman at Stoneridge Pollak: "We had originally specified it as requiring two different machines because of the complexity of the components".
"We had also estimated that it would require two people - to load the pallets and feed them onto the system".
Stoneridge Pollak immediately contacted Contax to ask for assistance.
"We have been dealing with Contax for the last 15 plus years", continued the spokesman.
"Indeed, we bought some very early machines from them and a couple of soldering machines - so we knew who to approach with this problem".
Bob Thornton at Contax had another solution that would save both time and manpower.
He recommended the Xyflex, a new high-speed high-accuracy dispenser manufactured by Camalot.
He explained that with Stoneridge Pollak's original specification, it would have little additional capacity - essential if production was set to increase.
Also, as the Xyflex provides automatic pallet loading it would save in labour; only one man is needed to operate the system rather that two, as originally estimated.
Speed is also a key factor.
The Xyflex chosen can operate at up to 120,000 dispenses per hour, whereas the previous system could only manage 15,000 dots per hour.
"Another feature of the Xyflex is that it has four dispensing heads working in sequence", continued the Stoneridge Pollak spokesperson.
"This means that we can use different needle sizes and place different amounts of solder according to the component".
"So, we have more solder for resistors whilst ICs only need a small amount of paste".
"Now, not only do we have a very fast and precise dispenser that has almost ten times the capability of one of the old systems, but we also save on labour costs", he concluded.
Stoneridge Pollak is currently producing 30,000 components per week, working two shifts 7 days per week.
After Christmas this will increase to three shifts.
"Before Contax's recommendations we were looking at two systems and two men to run this production system".
"Now we only need one engineer and the Xyflex system", said the commentator at Stoneridge Pollak.
"Contax has given us excellent advice, and also provides superb after-sales service", he continued.
"We have total peace of mind, knowing that we can call on the service department any time of the day or night".
He continued: "Service is a key issue for us".
"We wanted to deal with a UK company with a good regional network of service engineers who really understand the systems".
"For us, Contax is the only company with those credentials", he said.
• Contax: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
