Product category:
PCB Assembly Equipment and Tools
News Release from: Contax | Subject: McDry cabinets
Edited by the Electronicstalk Editorial
Team on 04 March 2005
Cabinets keep components fresh and ready
to solder
One of the UK's leading contract electronics manufacturers recently purchased three McDry cabinets of varying sizes from production automation specialist, Contax.
MRP Electronics, one of the UK's leading contract electronics manufacturers specialising in surface mount PCB assembly, recently purchased three McDry cabinets of varying sizes from production automation specialist, Contax MRP Electronics manufactures a wide range of PCB assemblies, many fitted with BGA and QFP devices, and required an effective storage medium to ensure integrity of the product at varying stages of manufacture
This article was originally published on Electronicstalk on 14 Apr 2004 at 8.00am (UK)
Related stories
Overmoulding protects cables and assemblies
The Werner Wirth overmoulding machine operates with both cable preparation and PCB assembly equipment, moulding strain reliefs, connector shells and grommets onto electrical cables.
Automatic crimper handles ultrafine wires
The Komax Gamma 255 is a fully automatic crimping machine for top-quality processing of ultrafine wires.
The small cabinet will be used for local storage, the medium one will house SMD devices during production, and the largest unit will be used for permanent component storage.
Explained John Cardi, Production Engineering Manager at MRP Electronics: "The storage of moisture-sensitive devices is critical".
"When the BGAs are stored in an open enviroment they absorb moisture which can give unpredictable results during reflow".
Further reading
Crimper suits flexible production schedules
The Komax Zeta 633 fully automatic crimping machine is ideal for the just-in-time production of individual conductors and offers a virtually limitless number of possible processes.
Oven is ideal for lead-free processing
The Essemtec RO300FC is a new full convection reflow oven for high-temperature soldering of sensitive electronics, and is an ideal solution for lead free soldering.
Automatic crimping adds value for Irish CEM
Elite Electronics, Northern Ireland's leading contract electronics manufacturer has purchased the new Komax Gamma 333PC, a fully automatic crimping machine from Contax.
"If they are stored in moisture barrier bags (MBBs), once they are removed they have to be used quickly or rebagged".
"We have experienced some problems with 'popcorning' during reflow, where the soldered heat drives out any remaining moisture so the devices crack".
"This is obviously a waste of both components and test/rework capacity, so we needed to resolve the issue", he said.
The incidence of microcracking is widespread and has been highlighted in the standard for "Handling, packing, shipping and use of moisture/reflow sensitive surface mount devices", IPC/JEDEC J-STD-033a (July 2002).
It is estimated that virtually 100% of IC packages containing moisture experience a problem during the reflow process.
This results in the corrosion of printed circuits and can cause wiring breakage and many other problems.
MRP Electronics decided that it needed to store the SMDs in a humidity controlled environment to ensure their integrity and prevent a "use by" date.
The company looked at two leading manufacturers' offerings, and after full evaluation decided on the McDry cabinets from Contax.
"Both systems were around the same price range, but the service from Contax was outstanding", said John Cardi.
"The quote came back quickly, the sales manager was knowledgeable and helpful".
"From the initial response and service, we knew that Contax would be attentive to our needs and ensure a smooth installation".
He continued: "The McDry cabinets also met our spec exactly".
"They are available in a range of sizes - and we needed our dry cabinets to be compact and easy to use".
"They must maintain an RH level of 5% or below, and require minimal maintenance".
McDry cabinets are nitrogen-free, instead relying on a powerful zeolite desiccant which is self regenerating and therefore does not need replacing.
This ensures that the units save both maintenance time and the associated costs.
Furthermore, the cabinets vary in both size and humidity level, going as low as 1% humidity.
"All these factors ensured that we selected Contax as our supplier", continued Cardi.
"And we have definitely made the correct decision".
"The McDry cabinets are working well, and we have the confidence that we are building good devices".
"This has been borne out with the testing".
"The use of the cabinets has given even tighter control of our processes".
"We are currently placing in the region of 10,000 BGA devices per month and this figure is growing fast".
"We would not have been able to expand at this rate without the certainty that our devices are problem-free", he concluded.
• Contax: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
