Product category:
CompactPCI Boards and Assemblies
News Release from: Acal Microsystems | Subject: CPCI-3915
Edited by the Electronicstalk Editorial
Team on 01 September 2006
SBC promotes high-speed connectivity
RoHS-compliant single board computer combines the low-power and high-performance Intel Pentium M/Celeron M processor with DDR2 technology and gigabit connectivity.
Acal Microsystems has another Adlink RoHS-compliant single board computer that combines the low-power and high-performance Intel Pentium M/Celeron M processor with DDR2 technology and gigabit connectivity Dubbed the cPCI-3915, the innovative SBC is available in single or dual-slot cPCI form factor, both supporting Intel Pentium M CPU with 2Mbyte L2 cache and up to 2.0GHz speed and backs the next generation DDR2 memory architecture via a SODIMM slot for up to 1Gbyte of DDR2 400/533MHz memory module
This article was originally published on Electronicstalk on 3 May 2001 at 8.00am (UK)
Related stories
Embedded controller allows direct access to ATM
The Interphase 4531, available in the UK from Crellon Microsystems, allows system integrators to access the ATM backbone without requiring an external CSU/DSU.
Embedded motherboard configured for connectivity
The PATX3070 Pentium-class motherboard, now available from Crellon Microsystems, combines AGP graphics capability with a range of powerful interfaces.
The SBC design complies with the industry's power saving measures while providing optimum performance and enhanced system response.
Onboard the cPCI-3915 are dual Gigabit Ethernet ports that use the high-bandwidth PCI-Express bus to provide efficient remote management and reliable network connectivity vital for today's rigorous applications.
The cPCI-3915 also features multiple storage interfaces for a 2.5in Serial ATA or IDE hard disk drive and a CompactFlash card slot for OS installation and data keeping.
An optional rear transition module provides high-resolution and dual-channel support for multiple-display interfaces such as CRTs (up to 2048 x 1536 resolution), DVI-ready monitors (up to 165Mbyte/s) and LVDS terminals (1 x 18bit/pixel) and enables the cPCI-3915 to support graphics-driven and interactive applications.
The cPCI-3915 also promotes high-speed connectivity via three USB 2.0 ports conveniently mounted on the front and rear panels and two front-panel DB-9 serial ports.
• Acal Microsystems: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
