Product category:
PCB Assembly Equipment and Tools
News Release from: DEK
Edited by the Electronicstalk Editorial
Team on 21 November 2005
Report details lead-free stencil
requirements
A new report reveals how stencil aperture dimensions must be increased when working with lead-free pastes to ensure adequate wetting forces and thereby prevent tombstoning.
DEK has published its latest findings on screen printing with lead-free pastes, focusing on the implications for stencil design rules The results also underline the importance of using an enclosed head and nickel stencils to maximise quality and yield
This article was originally published on Electronicstalk on 28 May 2008 at 8.00am (UK)
Related stories
Print platforms add features and performance
DEK has added a number of performance and productivity improvements to its Horizon product line.
Screen service provides fast delivery
Manufacturers of PV cells can combine DEK's precision screens with printers from DEK or third-party suppliers.
The report, "Understanding stencil requirements for a lead free mass imaging process", reveals how aperture dimensions must increase to ensure adequate wetting forces and thereby prevent tombstoning as paste-to-pad and component-to-pad offsets occur.
Such offsets are unavoidable in any production environment, implying that manufacturers must re-optimise stencils for lead-free printing in order to ensure yield rates comparable to lead-rich processes.
The report also reveals that this issue is more prevalent with smaller components of size 0402 and below.
By testing a total of 67 new aperture characteristics, including varying dimensions, aspect ratio, shape and stencil thickness, DEK's experimental team identified the necessary changes in aperture characteristics.
According to the team leader and author of the report, Clive Ashmore, the main concern is to ensure a higher volume of paste in order to compensate for the lower wetting forces exerted by lead-free pastes.
When placing small chip devices such as passive components these wetting forces help retain the component during reflow.
Slight misalignment between the component, solder deposit and paste leads to imbalance in wetting forces, which increases the risk of tombstoning.
Ashmore, who is Global Applied Process Engineering Group Manager at DEK Printing Machines, said: "A perfectly centred screen printing process will perform well whether lead-rich or lead-free paste is used".
"But such processes can only be sustained under laboratory conditions, which obviously cannot be provided in a production context".
"Assemblers must, therefore, take steps to ensure their stencils are optimised for lead-free printing".
"Our findings show that continuing to use legacy stencils that meet the lead-rich design rules will result in significantly higher numbers of defects".
The full report is now available from the DEK website, which describes in detail the experimental conditions applied, the range of aperture characteristics analysed, plus quantitative and qualitative results.
• DEK: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
