Product category:
Communications ICs (Wired)
News Release from: Digi International | Subject: NS9360
Edited by the Electronicstalk Editorial
Team on 23 October 2006
Network processor provides missing
control link
When IPCS required a solution for its new Netgenium IP lock controller, a rapid, reliable and easy means of adding intelligent connectivity was needed.
IP Control Systems (IPCS) is a leading specialist in the research and development of products that assist in IP convergence across a range of systems Its solutions allow a building's lighting, entry access, telephony, HVAC and CCTV systems to be connected over a single IP network
This article was originally published on Electronicstalk on 8 May 2003 at 8.00am (UK)
Related stories
Compact device server for easy embedded networking
The Digi Connect ME is claimed to be the most powerful and customisable embedded networking solution available, as well as one of the smallest.
Bluetooth takes over RS232 links
The Wavespeed/S wireless serial adapter uses Bluetooth technology for simple connection of peripheral devices.
This creates a much simpler, easier and smaller LAN that is cost effective to manage.
So, when IPCS required a solution for its new Netgenium IP lock controller that enabled doors to be opened or closed remotely via an IP Ethernet connection and integrated with IP telephony or CCTV systems, a rapid, reliable and easy means of adding intelligent connectivity was needed.
Digi International's powerful NS9360 microprocessor proved the ideal solution.
Further reading
Serial cards have all PCI specs covered
All Digi International asynchronous multiport serial cards have been enhanced to support the latest PCI standards, including PCI-X compatibility.
Easy customisation for embedded comms modules
Two customisable products have been added to Digi's industry-leading family of network connectivity products - the Digi Connect EM and Digi Connect SP.
Modules drop in to embed Wi-Fi links
Digi Connect Wi-ME and Digi Connect Wi-EM are billed the industry's first fully customisable and secure 32bit 802.11b wireless embedded modules.
Access control equipment is one of the newest areas that IPCS has integrated into its product offerings.
Door control systems that can be activated through an internet-based protocol are a major part of this.
When it first developed the IP lock controller, IPCS needed a solution that would work over Ethernet, and integrate with both IP telephony and CCTV.
For example, if someone requested entry at a door they could be seen over IP-enabled CCTV and heard over an IP-enabled telephone.
The challenge however was finding a processor with the performance, speed and reliability to effectively regulate a door lock, while preventing failures including constant systems reboots which could prevent people from accessing their homes and offices.
When IPCS discovered Digi's NS9360 microprocessor, its 32bit, 177MHz performance was exactly what IPCS needed.
IPCS programmed using C and the implementation was extremely quick and easy.
Paul Anderson, Managing Director of IPCS, commented: "Our background is in networking, not electronics design, but with Digi's support we found integration of the NS9360 chip much simpler and faster than we had expected".
"We first learnt about the NS9360 in May and by October we already had a working product".
The NS9360 offers a whole new level of performance to network-attached processing.
It provides full duplex 10/100Base-T Ethernet with more than enough additional processing performance and bandwidth to handle sophisticated embedded applications.
It is based on the ARM 926EJ-S, the most powerful ARM9 core, which contains both DSP and Java byte code instructions.
It operates at up to 177MHz and contains a broad set of industry standard peripherals: USBd, USBh, I2C, 1284, serial ports and a high-performance LCD controller.
The NS9360 is a member of Digi's NET+ARM family of 32bit processors exclusively targeted at network enabling embedded electronic equipment.
These processors are all supported by the NET+Works software development tools suite, which contains Green Hills Multi or Microcross Gnu X-Tools, a hardware debugger, utilities, and application examples.
Throughout the creation of its door control system prototype Digi offered IPCS great support.
Digi thoroughly reviewed IPCS' prototypes and offered helpful comments and suggestions.
This support enabled IPCS to considerably speed up the development time of its final product.
Thanks to this quick integration, IPCS could easily fulfil the orders that were placed around the time of the original prototype design.
IPCS' Netgenium IP lock controller solution has successfully integrated with IP systems on a variety of projects.
The solution is fully powered by power over Ethernet (802.3af).
POE negates the requirement for a local power supply and reduces costs as only one cable needs to be run to each door.
It is also compliant internationally, allowing the solution to be used worldwide.
The new product's integration with IP systems ensures that anyone can be granted door entry through a number of methods.
They can be viewed on CCTV, spoken to and granted access via an IP-enabled telephone, or even provided entry from an individual remotely monitoring them from a computer terminal.
Further benefits of the Netgenium IP lock controller, the world's first native IP lock controller, include secure encryption services, support for magnetic locks, door strikes and sheer locks, battery backup, support for manual exit switches, and timed and toggled door operations.
Throughout the project the NS9360 was easy to use and provided simple architecture that was simple to master.
The resulting product has proven to be a tremendous success.
• Digi International: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
