Latest news on Electronicstalk categorised by supplier
Dima SMT Systems NL
Address:
Beukelsdijk 2
Deurne
5753 PA
The Netherlands
Telephone: (The Netherlands) +31 493 352 757
Our RSS feed for news from Dima SMT Systems NL
Request to receive our free email newsletter each week
Listing of all 13 news releases from Dima SMT Systems NL:
Manual stencil printer needs no power
A benchtop manual stencil printer is the latest designed for low- to medium-volume surface-mount assembly runs.
News from Dima SMT Systems NL ( 3 July 2006)
Pick and place machine handles smaller parts
The Hybrid pick and place system can now handle 0201 components.
News from Dima SMT Systems NL (20 April 2006)
Flexibility is key to handling lead-free reflow
Technical background article The success of a reflow oven is not measured in its size or the number of heating zones, it is determined by the ability to create every possible reflow profile.
News from Dima SMT Systems NL ( 6 March 2006)
Valve sprays conformal coatings more evenly
Dima has developed a novel spray valve that enables users to spray any available coating material more accurately and repeatedly without any overspray or mist.
News from Dima SMT Systems NL (22 December 2005)
Conformal coating comes up to date
Dima has developed a complete new range of selective conformal coating systems.
News from Dima SMT Systems NL (31 October 2005)
Taped components keep production running
Using the Dima Handytaper production engineers can easily package components into any type of tape.
News from Dima SMT Systems NL (31 October 2005)
Offline programming station speeds throughput
A new offline programming station speeds throughput for small batch users of Dima Hybrid pick and place systems.
News from Dima SMT Systems NL (30 August 2005)
Software puts pick and place to the fore
Dima SMT Systems has developed a software package of a type so far only available from a few suppliers of high end pick and place machines.
News from Dima SMT Systems NL (11 July 2005)
Reflow oven is cost effective for low volumes
A new lead free full convection reflow oven targets the needs of companies that only have a single PCB or a small batch of PCBs that need to be reflow soldered.
News from Dima SMT Systems NL ( 2 June 2005)
Desktop dispenser uses advanced robotics
The Dispense Master is billed as a new standard in dispensing technology.
News from Dima SMT Systems NL (18 April 2005)
Stencil printer resolves to boost Pb-free accuracy
New from Dima SMT Systems, the HS-100 is a semi-automatic stencil printer with an optional under-stencil cleaning unit.
News from Dima SMT Systems NL (21 March 2005)
Compact reflow oven handles lead-free processing
The Solano is a full convection reflow oven for lead-free processing.
News from Dima SMT Systems NL (23 February 2005)
Upgrade kits boost dispensing robot versatility
Three new upgrade kits for the successful Dotmaster dispensing robot enable it to dispense lines, arcs, circles and spirals in addition to its standard dots.
News from Dima SMT Systems NL (20 January 2005)

