Latest news on Electronicstalk categorised by supplier
Dynamic Engineering
Address:
150 Dubois Strees
Suite 3
Santa Cruz
CA 95060
USA
Telephone: (USA) +1 831 457 8891
Our RSS feed for news from Dynamic Engineering
Request to receive our free email newsletter each week
Listing of all 19 news releases from Dynamic Engineering:
Two independent CANs come together
IndustryPack Module includes two channels of Controller Area Network.
News from Dynamic Engineering (12 March 2008)
Chassis provides secure home for PMCs
Chassis and mini-carrier combine to form a compact (162 x 106 x 50mm) and cost-effective answer for connecting multiple PMCs.
News from Dynamic Engineering (25 February 2008)
Eight-channel PMC keeps its cool
The PMC-BiSerial-III-TRANS has eight channels, each fully programmable and capable of operating independently or in concert with the other I/O.
News from Dynamic Engineering (25 September 2007)
Chassis tolerates vibration and shocks
The PC104p chassis is based on an extruded aluminium outer housing with machined end caps.
News from Dynamic Engineering (24 August 2007)
Module hosts two independent CAN channels
IndustryPack module hosts two channels of Controller Area Network that provide BasiCAN and PeliCAN operation.
News from Dynamic Engineering ( 5 March 2007)
Board keeps watch over SpaceWire links
The Dynamic Engineering SpaceWire Break-Out monitors the signals of a single SpaceWire link.
News from Dynamic Engineering (27 December 2006)
CompactPCI carrier hosts two mezzanines
New from Dynamic Engineering, the cCIBPMC6U-ET is a 6U 4HP CompactPCI bridged dual PMC carrier with extended temperature specifications.
News from Dynamic Engineering ( 6 November 2006)
IndustryPack modules find a home on CompactPCI
The cPCI-compatible cPCI2IP design adds two IndustryPack compatible slots to a cPCI host.
News from Dynamic Engineering ( 4 September 2006)
Mezzanine cards mount in CompactPCI slots
The cPCI2PMC (cPCI to PMC) adapter/carrier convertor card provides the ability to install a PMC card into a standard cPCI slot.
News from Dynamic Engineering ( 4 September 2006)
Adapter bridges gap from IndustryPack to IDE
The IndustryPack compatible IP-CF design converts between the IP module bus and the IDE bus used for Flash memory modules and other PC Card compatible designs.
News from Dynamic Engineering ( 4 September 2006)
Customised PCI-ECL card has Windows driver
The PCI-NECL-ASN1 supplies 20 ECL transmitters and 20 ECL receivers plus 12 TTL I/Os.
News from Dynamic Engineering ( 4 September 2006)
Carrier handles up to four mezzanine cards
The PMC-MC-X4/X2 adapter/carrier convertor card provides the ability to install up to four PMC cards into a small enclosure.
News from Dynamic Engineering ( 4 September 2006)
Carrier brings IndustryPacks to PC/104+
The PC104p4IP is billed as the ideal choice for anyone who wants to use IndustryPack modules with a PC/104+ or PC/104-Plus system.
News from Dynamic Engineering ( 4 September 2006)
Mezzanine card offers design flexibility
The PMC-XM is intended for use in situations where the user wants to control the design.
News from Dynamic Engineering ( 4 September 2006)
Mezzanine card speeds from point to point
The PMC-Wizard is intended for use in ultra high-speed bidirectional point-to-point data transmission systems.
News from Dynamic Engineering ( 4 September 2006)
PCI bridge has two PMC slots
The PCIBPMCx2 has two PMC card slots mounted to a universal voltage PCI card, and is suitable for PCI or PCI-X operation with 32 or 64bit data and 33, 66, 100 or 133MHz clock.
News from Dynamic Engineering ( 4 September 2006)
Adapter puts mezzanine cards in cPCI slots
The cPCIBPMC3U64ET (cPCI to PMC) adapter/carrier convertor card provides the ability to install a PMC card into a standard cPCI slot.
News from Dynamic Engineering (29 August 2006)
Connector board eases switch to SpaceWire
Novel SpaceWire connector board helps with the transition from custom cabling to SpaceWire standard cabling.
News from Dynamic Engineering (22 August 2006)
PCI card interfaces with high-speed logic
The PCI-NECL-ASN1 supplies 20 ECL transmitters and 20 ECL receivers plus 12 TTL I/Os.
News from Dynamic Engineering ( 9 September 2004)

