Adapter bridges gap from IndustryPack to IDE
A
Dynamic Engineering product story
Edited by the Electronicstalk editorial team
Sep 4, 2006
The IndustryPack compatible IP-CF design converts between the IP module bus and the IDE bus used for Flash memory modules and other PC Card compatible designs.
The IndustryPack compatible IP-CF design converts between the IP module bus and the IDE bus used for Flash memory modules and other PC Card compatible designs.
The IP-CF acts as an adapter, convertor, carrier or bridge between the IP bus and PC Card hardware.
The IP-CF comes with a 256Mbyte CompactFlash card.
The IP-CF is compatible with 8 and 32MHz IP bus interfaces.
A speed select control bit optimises the state machines for either frequency.
The external IDE interface has fused power to support a transition module with a second device.
Series resistors are used to dampen cable induced reflections when a second device is installed.
The default is for the internal device to be the master.
Most IP carriers use 50 pin headers to support ribbon cable.
When the transition module is not needed the HDRterm50 can be used to create a terminal block interface.
A local oscillator and a complete IP control interface are provided to allow for custom implementations.
Not what you're looking for? Search the site.
Contact Dynamic Engineering
Related Stories
- Kontron releases advanced mezzanine card
- Kontron develops nanoETXexpress module
- Advanced Micro Peripherals offers the Vcodec-H264
- MSC Vertriebs develops Qseven embedded module
- Enocean releases the Dolphin wireless system
Categories
- Active Components (11,917)
- Passive Components (2,949)
- Design and Development (9,394)
- Enclosures and Panel Products (3,246)
- Interconnection (2,841)
- Electronics Manufacturing, Production, Packaging (3,055)
- Industry News (1,898)
- Optoelectronics (1,616)
- Power Supplies (2,297)
- Subassemblies (4,551)
- Test and Measurement (4,956)
