Product category:
Design and Development Software
News Release from: Flomerics | Subject: Thermal Design Services
Edited by the Electronicstalk Editorial
Team on 03 October 2002
Thermal analysis aids in-flight
entertainment
When Thales Avionics needed a speedy thermal solution for its understair video control cabinet, they called on the Thermal Design Services group at Flomerics for quick answers.
When the engineers at Thales Avionics needed a thermal solution for their understair video control cabinet (VCC) within a restricted time budget, they called on the Thermal Design Services (TDS) group at Flomerics for quick answers Thales had used Flomerics' Flotherm thermal analysis software in the past and knew that they could expect fast results and accurate answers
This article was originally published on Electronicstalk on 9 Apr 2003 at 8.00am (UK)
Related stories
Thermal analysis spots "paradoxical" heatsink
Thermal analysis has played a crucial role in significantly reducing development costs and time to market for IFR's new ultracompact IFR 3410 range of RF signal generators.
Thermal design optimises point-multipoint hardware
When Cambridge Broadband needed to verify the thermal design of its VectaStar 3500 its engineers turned to Flomerics' Thermal Design Services team to validate and optimise the initial design.
An earlier version of the VCC design had been used on several new aircraft for an airline customer of Thales.
After seeing how well the systems had performed on the new aircraft, the airline decided to retrofit the Thales system onto four of their existing 747 aircraft.
The installation had to work within the boundaries of current cabin conditions and accommodate older interfacing equipment on the existing aircraft.
Further reading
Thermal simulation helps platform beat ATCA specs
Design team leader claims that thermal simulation is like having X-ray vision.
Thermal simulation cuts potting costs in half
The Flopack web-based wizard quickly produces accurate models of integrated circuits and other components.
The system dissipates approximately 240W in total and is cooled with forced air provided by an external source.
Air is drawn into the VCC through five inlet vents in the front panel of the unit and is exhausted through a single outlet plenum in the bottom face.
The system must meet the stringent ventilation requirements set forth by the aircraft manufacturer.
Using FLO/MCAD, the design consultants at Flomerics were able to quickly build an analytical prototype of the system.
The electronic geometry, provided by Thales in the form of IGES files, was easily imported into Flotherm.
The analytical model was used to investigate the overall thermal performance of the system by predicting the overall temperature rise through the chassis, the general airflow patterns, and the partitioning of flow between various intake vents.
The analysis showed that the VCC design was able to meet the specified ventilation requirements.
Through the analysis by Thermal Design Services, Thales was able to verify that their design was optimised and would meet all design objectives.
In addition, Flomerics was also able to deliver the requisite compliance with Federal Aviation Administration (FAA) regulations from a designated engineering representative (DER) pursuant to Federal Aviation Regulation (FAR) 25.1301, 25.1309.
Commenting on the project, Sam Suh, a Senior Mechanical Engineer at Thales said, "I was very pleased with the Thermal Design Services analysis not just because of the final results, but also because of their ability to deliver the results within a very short time frame. Request a free brochure from Flomerics ...
The TDS analysis confirmed the thermal integrity of the VCC and gave us the confidence to release the design for full production.".
• Flomerics: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
