Product category:
Design and Development Software
News Release from: Flomerics | Subject: MicroStripes
Edited by the Electronicstalk Editorial
Team on 07 November 2007
Novel approach cuts EM models down to
size
A new absorbing boundary technique in the Flomerics MicroStripes 3D electromagnetic simulation solution accelerates the design of antennas installed in the earth.
Emanuel Merulla, Antenna Design Engineer for MegaWave Corporation, Boylston, Massachusetts, has applied a new absorbing boundary technique in the Flomerics MicroStripes 3D electromagnetic (EM) simulation solution, to accelerate the design of low-profile and zero-profile antennas installed in the earth The new technique significantly reduces the computer memory requirements and cuts simulation times from days to an hour or two
This article was originally published on Electronicstalk on 10 May 2005 at 8.00am (UK)
Related stories
Modelling software boosts RFID read rates
Flomerics reckons its MicroStripes 3D electromagnetic modelling software can improve RFID read rates by accurately simulating the performance of tag antennas under various conditions.
Software speeds electromagnetic design simulation
The latest version of the MicroStripes electromagnetic design simulation software for microwave and antenna design substantially increases the speed with which users can tune their designs.
"We have already designed more than 50 antennas for various branches of the military using the new earth boundary technique", says Merulla.
"The reduced size of the model combined with the high speed of MicroStripes makes it possible to deliver better performing antennas to our customers in less time".
The military is placing a strong emphasis on improving the performance of easy-to-conceal antennas that are either used on or near the ground or buried.
Further reading
EM simulation produces optimised PC antennas
Itronix has cut the time required to integrate extended wireless capabilities into PCs by using computer simulation to evaluate antenna performance without a physical prototype.
Software predicts anechoic chamber performance
MicroStripes software played a key role in the design of an anechoic chamber by simulating the performance of the chamber within +/-1dB accuracy.
Microwave simulator has flexible inputs
Version 7.5 of MicroStripes 3D EM simulation solution for RF/microwave and antenna design integrates with Applied Wave Research's Microwave Office circuit design software.
Engineers designing these antennas face a major challenge in that ground waves, which attach to the surface of the earth, play a major role in their performance.
In order to accurately model ground waves using electromagnetic simulation, the earth normally needs to be modelled to at least three times the skin depth of the wave, to allow space and time for the ground wave to be differentiated from the fields that propagate into the earth that are ultimately dissipated in the dielectric losses.
This generally increases the size of the model to point that it takes days to solve, slowing down the design process and limiting the number of alternative designs that can be evaluated.
EM Engineers at Flomerics worked closely with Merulla to develop a new approach that enables the earth to be truncated to a much smaller size with minimal impact on simulation accuracy.
The challenge was to create a boundary condition that absorbs the field propagating into the earth, without disturbing the ground waves that contribute to the overall antenna radiation pattern.
This was achieved by inserting an absorbing surface into the earth and matching its impedance to the fields.
David Johns, Director of EM Engineering at Flomerics, says: "Our engineering team takes great pride in finding unique and effective solutions for our customers, who are constantly pushing the boundaries of electromagnetic analysis".
Merulla consulted technical literature and used probes to measure the complex dielectric constant and magnetic permeability of the earth.
The parameters of the absorbing boundary condition were optimised to match the earth so the boundary condition, like the real earth, absorbs essentially all of the electromagnetic energy that reaches it.
"MicroStripes is my preferred 3D EM solution because it saves time by calculating all frequencies at once", says Merulla.
"MicroStripes also solves without difficulty models of a size that would choke other simulation programs".
MicroStripes uses the transmission line matrix (TLM) method for solving Maxwell's equations in the time-domain.
The antenna is driven by an impulse and the subsequent propagation of fields in space and time can be visualised in 3D.
Fourier transformation is used to convert the impulse response into the frequency domain, providing results over a broad spectrum.
Merulla first used this approach to design a simple inverted cone antenna, which is similar to a wideband monopole, primarily to validate the technique.
The company built a prototype of the antenna and the physical testing results matched the simulation within 10%.
"The simulation results of every antenna we have modelled using this method have closely matched the physical prototypes once they were built", concludes Merulla. Request a free brochure from Flomerics ...
• Flomerics: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
