Product category:
Cables and Wires
News Release from: Gigahertz Marketing Solutions | Subject: EZ-Flex-86
Edited by the Electronicstalk Editorial
Team on 29 March 2007
Hand formable coax is fully shielded
from RFI
Hand-formable 50ohm coaxial cable has the same electrical characteristics as regular 2.2mm-diameter semirigid cable.
EZ-Flex-86 is a hand formable 50ohm coaxial cable with the same electrical characteristics as regular 2.2mm-diameter semirigid cable Using a copper-tin composite outer conductor, EZ Flex formable cables provide the same 100% RF shielding as solid jacketed cable, but may be formed into shape by hand
This article was originally published on Electronicstalk on 9 Sep 2005 at 8.00am (UK)
Related stories
Wideband amp keeps quiet on the testbench
A new solution to wideband amplification is the APT4-00502000-2410-D4 low noise amplifier manufactured by Amplitech.
The centre conductor is silver plated copperweld and dielectric is PTFE.
Maximum operating temperature is 125C.
The light weight of 15g/m is 30% less than the equivalent solid jacketed cable.
The use of hand formable cables also eliminates the need for complex 3D drawings and expensive tolling and fixtures.
EZ-Flex Formable cables can be used with any direct solder connector designed for 2.2mm-diameter cable and is suitable for applications up to 18GHz.
Other sizes available are 6.35, 3.58 and 1.19mm, all of which are supplied in 30.5m reels.
EZ-Flex cables are manufactured by EZ Form Cable Corporation of the USA and supported in the UK and Ireland by Gigahertz Marketing Solutions.
• Gigahertz Marketing Solutions: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
