Click on the advert above to visit the company web site

Product category: Board-Level Instruments
News Release from: Goepel Electronic | Subject: USB 31128
Edited by the Electronicstalk Editorial Team on 15 October 2007

Relay board enables numerous matrix
configurations

By changing bridges at the relays and selective switching of the relay interfaces with each other, the USB 31128 can be adapted to specific applications.

Goepel Electronic's USB 31128 is a relay board with USB 2.0 interface for general measurement and control applications to switch electronic signals with electronic isolation The board's architecture enables numerous matrix configurations whereby users are able to define the matrix arrangement by themselves

A cost-effective and simply adaptable module with numerous applications is available.

The board's basic structure is a block of eight to one relays.

There are 16 blocks of this structure, eight on both the base board and the daughter board.

Consequently, the USB 31128 with daughter board provides 128 relays with open contacts.

These 16 blocks can be interconnected by means of connectors and configuration adapters to form various matrix types.

Therefore, the module can be used as multiplexer or demultiplexer/splitter and as 128 single relays.

By changing bridges at the relays and selective switching of the relay interfaces with each other, the USB 31128 can be adapted to specific applications.

The module can also be used to disconnect individual signals by removing as many 0ohm resistors as required. Request a free brochure from Goepel Electronic ...

• Goepel Electronic: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page

Search the Pro-Talk network of sites