Product category:
Handheld and Other Small Enclosures
News Release from: Hammond Electronics | Subject: 1591XX Series
Edited by the Electronicstalk Editorial
Team on 01 February 2008
Small instrument housings are clearly
smarter
Plastic case is translucent to blue, white and near white LEDs, readouts and displays, enabling them to be mounted inside the enclosure.
Hammond Electronics has introduced ice blue translucent versions of its latest 1591XX Series small instrument housings The plastic is translucent to blue, white and near white LEDs, readouts and displays, enabling them to be mounted inside the enclosure, reducing configuration costs because cutouts will not need to be machined
This article was originally published on Electronicstalk on 1 Jun 2000 at 8.00am (UK)
Related stories
New sizes of waterproof die-cast enclosures
Hammond Electronics has extended its range of waterproof die-cast enclosures with the introduction of several new sizes in its 1590W Series.
Moulded in ABS with a satin texture finish, the seven-strong family range in size from 87 x 57 x 36 to 193 x 113 x 58mm.
The cases are optimised for mounting PCBs horizontally, with four standoffs moulded into both the top and the base.
Designed for applications where up-to-the-minute styling is important, where it will be beneficial for the internal components to be visible or for them to be fully protected, the enclosures are sealed to IP54, with a lap joint keeping out dust and splashing water.
The lids are secured using M3 screws running into brass bush inserts in the base, so they are ideal for applications where repeated access to the housed electronics is likely to be required.
• Hammond Electronics: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
